Step 1 – For this project I’ll be using Auto Air paint and a double action air- brush. I first spray a light coating of Auto Air’s Semi-Opaque Brite White as my base color. This is so my pencil lines will show up when I transfer the image onto the car door. It’s actually more of a light gray than white as you can see; it still will be enough of a light color that my pencil lines will show up.

Step 2 – With the car already in the spray booth, covered and prepped for paint, I realized I wasn’t going to be able to project the image with an opaque projector directly onto the car, so I projected it onto some large paper I found at the shop. I then continued to scribble on the backside of the artwork, creating a homemade carbon paper. This allowed me to retrace the front artwork, applying enough pressure to transfer the carbon onto the white base color on the door. The design pencil lines don’t need to be be real heavy here as they might become hard to cover up during the painting process.

Step 3 – Once I had the pencil image on the car, I began to build up the main character (devil) with the same mixture of white so he would be brighter when I was finished. In this stage, I am not focused on creating any detail; therefore I am just quickly fogging in the image.

Step 4 – Now with a mixture of 80% Trans- parent Violet and 20% Semi-Opaque Black, I begin to outline, shadow, and create detail to the demon. 80-90% of the detail of the character is created in this step. Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32