124
Introducing
Program 1210
the TB1530
window/protection
ThreeBond’s 1530 product is a one-part, non-solvent
elastic adhesive whose main component is a
panels
silyl-based special polymer which reacts rapidly
upon exposure to moisture in the air and cures to
The latest innovation from EMKA is a classic style cabinet instrumentation
form a toughened elastomer.
window, which is also available in self-assembly format.
Since there are no solvents or plasticisers contained in
The 1210 window system uses a high rigidity aluminium profile with rugged corner
assemblies and blended-in lock housing available with nine lock varients and readily
the adhesive it shows excellent non-staining characteristics
convertible for LH or RH operation.
against all materials and is paintable.
EMKA says that the 1210 takes up less shelf or work-space while also allowing use
ThreeBond says that the 1530 provides excellent
of specialist infill panels for aesthetic or protective reasons. The system is also
weather resistance, high adhesion strength to most
upgradable to IP54 by the addition of internal seals and drainage channels in standard
substrates, without the need for primer pre-treatment,
sizes from 300mm x 200mm up to 2,000mm x 1,000mm.
and is environmentally friendly due to its low odour and
The 1210 program is offered as a single window for direct fitment to a door or panel
non-isocyanate chemistry. This makes it ideal for or as a frame/window pack to provide up to 47mm clearance for panel mounted
multi-purpose bonding of metals (aluminium, steel, indicators or other hardware.
stainless, copper), plastics (polyacrylate, PPO, ABS, nylon,
PC, FRP, PET, PPS, PBT), as well as other materials such as
wood, glass, canvas and rubbers.
TB1530 can also be used for sealing and potting of
electronic/electrical assemblies for which conventional
RTV rubbers have been used. However, as no
low-molecular siloxanes are produced during curing it
will not corrode metals nor impair electrical contacts.
“TB1530 is highly elastic
with good peel strength,
coupled to excellent
impact/vibration
resistance and does
not require UV or
thermal curing
facilities. Its high
initial adhesive
strength means
that no temporary jig fixing is
required, with fixing strength available
immediately (following adhesive spread and 5 minute
dwell time prior to assembly), handling strength comes
within 20 minutes and full cure is achieved within 24
hours.”
Kale introduces the W2B
If your using a W2 material (band & housing AISI 430 /DIN 1.4016, screw steel zinc
plated) worm drive hose clamp, but are looking for a clip to substitute this for, Kale says
it can offer the solution with the introduction of its W2B material worm drive hose
clamp.
The Kale W2B clamp has a AISI 430 stainless steel band with a steel zinc plated screw and
housing. Kale comments that not only are the clamps competitively priced but they have a
corrosion resistance of a minimium 72 hours.
Kale worm drive hose clamps are manufactured according to DIN 3017 and are ISO TS 16949
certified. They can be purchased in the UK from Pinstructure Ltd.
“With bandwidth’s 9mm and 12mm available and a clamping range starting from 8mm to
400mm, we welcome you to try, test and approve our clamps for your applications.”
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140