The Embroidery Column


Supercharge your embroidery production and make more profit


Your embroidery production can be affected in so many ways, avoiding some or all of these can make a massive difference to your output and profit. Peter Wright, managing director at Amaya Sales UK, has put together some tips that should help you achieve both of these and improve on your current position.


R


emember that machine downtime can cost you thousands of pounds of lost production and profit. Also remember that you could lose customers if you let them down on delivery times.


Tip 1 – Machine maintenance Embroidery machines are probably one of the most expensive parts of your business but many of them are neglected, in regard to service and settings. Please make sure your machines are regularly maintained up to the manufacturerʼs specifications. Most of this you should be able to do yourself, but I would advise on having a trained engineer from the supplier at least once a year. You may think that the cost of a service is expensive but compared to any loss of production it is negligible. Call your supplier for a quote now.


Tip 2 – Thread breaks


These are the most common cause of machine downtime. If they are happening on a regular basis it is very important to find the cause. A machine in good working order should have very few thread breaks. Things to check:


a) Check the condition of the needle and its positioning.


b) Check the thread tension. c) Check the bobbin tension. d) Check the thread path is correct. e) Check the condition of the thread. Old thread could cause problems. Remember that if you have a fixed multihead machine, all your heads are stopped until the thread break is repaired. This is not so costly on a modular multihead machine where only one head will stop.


Tip 3 - Framing


Make sure you have framed up your next run in advance, you should have at least two sets of frames per size. In this way one would be on the machine and the other one waiting for the other one to finish. In this way the machine is only standing for seconds.


| 52 | February 2018 Maintenance is key


Also you should have enough staff to feed your machine so as not to have down time waiting for framed garments. Another benefit of a modular machine is that you can reframe as soon as one as finished.


Tip 4 – Optimise your work area Make sure your goods in, goods out and framing area are adjacent to your machinery and have a good workflow without obstructions.


Tip 5 – Digitised design Test run your new designs to make sure they run free of thread breaks and do not contain too many stitches. Stitches on top of each other and a heavy density can cause thread breaks and downtime.


Tip 6 – Design input


Make sure that new jobs/designs are in place to minimise downtime. Some machine systems now have a barcode


system that will enter information from the worksheet directly into the machine.


Tip 7 – Modular embroidery system Consider a modular embroidery system which will drastically cut your downtime and make your whole operation much more efficient. If you havenʼt already purchased a modular embroidery system, arrange a demonstration and see the difference it will make.


Tip 8– Leasing


If your machines are getting a little bit old why not consider purchasing more efficient new equipment. Leasing your equipment is very reasonable at the moment and could save you thousands in lost production.


Just take a few minutes to look at your set up and see if you can make any changes. You could be surprised on the amount of downtime and production you are losing.


www.printwearandpromotion.co.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80