Enclosures
Figure 5: The 1555 series (left) features a recessed cover to accommodate labels or membrane keypads, while the 1554 series (right) has a flat cover. (Image source: Hammond Manufacturing)
Figure 3: The 1557 series is available in black or gray in both ABS and polycarbonate materials with multiple mounting options. (Image source: Hammond Manufacturing)
1555F series. All products’ accessories include galvanized steel mounting panels to secure heavy pc boards. The metallic panel also serves as a base for internal shields for electromagnetic interference (EMI) suppression. Access control options include breather vents, pressure compensation plugs, liquid-tight strain- relief cord grips, and rainproof ventilators. These allow wire access and pressure equalization without compromising the watertight integrity of the enclosure. The ABS models are recommended for indoor use only. They have an ingress protection (IP) rating of IP66, indicating complete protection against dust and temporary water flooding. Polycarbonate enclosures are UV-stabilized and can be used indoors and outdoors. They are IP68 rated, indicating they are protected against dust and full water submersion. They are UL-rated (both cUL and UL508A listed) and have a flammability rating of UL94 5VA.
They are designed to meet NEMA type 4, 4X, 6, 6P, 12, and 13 ratings.
The series includes 23 different sizes in each material from 2.56 inches (in.) (65 millimetres [mm]) long by 2.56 in. (65 mm) wide by 1.67 in. (42.4 mm) high to 9.45 in. (240 mm) long by 6.34 in. (161 mm) wide by 2.40 in. (61 mm) high.
The Hammond Manufacturing 1555H2F42GY (Figure 2) is an example of a 1555F series enclosure. It is a flanged polycarbonate box that measures 7.086 in. (180 mm) long by 4.723 in. (120 mm) wide by 2.441 in. (62 mm) high.
This is a mid-sized enclosure intended for wall mounting. It has four circular mounting holes on the flange for permanent mounting and two keyhole openings for fast mounting and removal. Four M4 stainless steel screws mate with stainless steel inserts to mount the box to the base. The cover screws and inserts are outside of the gasket perimeter to ensure proper gasket sealing.
The 1557 series (Figure 3) is watertight and allows designers to choose from various mounting options. It is available in ABS plastic and polycarbonate materials with both offered in black or gray finishes. The materials meet the same standards as the 1555F series. Configured with rounded corners, it offers designers a contemporary look while maintaining dust and watertight integrity. These enclosures are available in eight different sizes with square cross sections from 3.15 in. (80 mm) by 3.15 in. (80 mm) to 7.874 in. (200 mm) by 7.874 in. (200 mm) with heights of 1.77 in. (45 mm), 2.36 in. (60 mm), or 2.76 in. (70 mm). The 1557 series’ mounting options include wall mount, tabletop mount, and an optional pole mount (Figure 4). The 1557DBK from the 1557 series measures 4.724 in. (120 mm) by 4.724 in. (120 mm) by 1.772 in. (45 mm) and consists of black ABS plastic. The 1557DBK is intended for indoor use with an ingress protection rating of IP66. Available options for this series include pole mount, an aluminium inner mounting panel, liquid- tight cord grips, a breather kit, and pressure compensation plugs. Replacement gaskets, lid screws, mounting screws, and rubber feet are also available.
The 1554 and 1555 series are general- purpose ABS plastic or polycarbonate enclosures. They have the same standards
Figure 4: Mounting options for the 1557 series include two wall mounts, a desktop/tabletop mount, and a pole mount. (Image source: Hammond Manufacturing)
conformance for each material as discussed with the previous enclosures. Each series offers 32 different sizes. Box sizes vary from 2.6 in. (66 mm) by 2.6 in. (66 mm) by 1.6 in. (40 mm) to 11.81 in. (300 mm) by 9.45 in. (240 mm) by 4.72 in. (120 mm). Cross sections are either square or rectangular.
The primary difference between the series is that the 1555 (Figure 5, left) uses a recessed cover for label or keypad mounting, while the 1554 (Figure 5, right) has a flat cover.
The polycarbonate versions of the 1554 series are available with opaque gray, clear, or translucent smoked covers. The ABS enclosure covers are only available in opaque gray. The clear and translucent covers are helpful to see internal indicators and readouts.
Options for the 1554 and 1555 series include inner panels of 16-gauge galvanized steel. Other options include a breather kit, pressure compensator plug, hole plugs, a small rainproof ventilator, liquid-tight cord grips, and a pole mount kit. Replaceable parts include spare gaskets and mounting and cover screws.
An example of the 1554 series is the 1554CGY. It is an ABS enclosure with dimensions of 4.724 in. (120 mm) by 2.559 in. (65 mm) by 1.575 in. (40 mm). The 1555HGY is an example from the 1555 series. It is an ABS enclosure with dimensions of 7.087 in. (180 mm) by 4.724 in. (120 mm) by 2.362 in. (60 mm).
Conclusion
Hammond Manufacturing offers a wide variety of off-the-shelf enclosures in a range of materials and an even more comprehensive selection of sizes. These enclosures include mounting bosses for circuit boards or DIN modules, internal metallic panels, access ports, and flexible mounting options. This variety allows designers to choose from various sealing and mounting options to meet their needs.
https://www.digikey.co.uk/ www.cieonline.co.uk Components in Electronics November 2024 39
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68
