Advertorials New Omron AC PCB Relay Delivers Its Highest Load Capacity


Omron Electronic Components Europe has extended its AC relay portfolio to provide its highest ever current and voltage capacity for AC PCB relays. The new G9KA-E operates with voltage capacity up to 1000VAC, and current up to 300A – one of the highest specifications in the current PCB relay market. Omron’s G9KA high-power relay series guarantees a mechanical lifetime of 100,000 operations. The ultra-low contact resistance of 0.2mOhm maximum minimises contact terminal heating allowing it to carry high current loads. The plunger-type relay structure


provides high endurance and lower power consumption, whilst well-designed terminals improve heat dissipation, further enhancing safety and longevity.


Applications include grid-tie inverters and uninterruptible power supplies. The G9KA series can be applied to inverters for photovoltaic and energy storage systems. Specifically, the G9KA-E is suitable for use in 200-400kVA / 600-800VAC inverters. Omron’s G9KA-E AC PCB relay is also ideal for UPS input and output lines, providing disconnect from the grid and the load. A particular advantage here is G9KA-E’s suitability for power supplies that incorporate 100-200kVA, 3-phase 400VAC input/output circuits. Replacing conventional contactors in all applications, these new PCB high-power relays reduce system weight and size whilst enabling simpler manual or automated assembly.


OMRON Electronic Components Europe +31 235 681 296


info-components-eu@omron.com


5” & 4.12” TFT LCD with Incell CTP


Craft Data’s newest additions to their display range are the LI12720T050TA3098, 5.0” 720(RGB)x1280 resolution and the LI72720T041TA3598 4.12” 720(RGB) x720 resolution IPS TFT LCD with the latest “Incell” 2-Point Capacitive Touch technology. For those not familiar with the term “Incell”, this refers to the capacitive touch being incorporated within the TFT cell reducing the need for the touch cover lens. This technique reduces the number of reflective surfaces within the TFT+Touch structure resulting in an ultra-thin (1.61mm and 2.12mm respectively), high contrast,


high colour gamut (70%) displays suitable for both indoor and outdoor applications. Both displays have a very good optical performance with an “All View” viewing direction, ultrawide viewing angles of 85°/85°/85°/85°, a 16.7M colour palette plus brightness’s of 300nits (5”) & 350nits (4.12”). The modules feature a MIPI display interface and an I²C touch interface all connecting through a single FPC.


Craft Data Limited 01296 332000 https://www.craftdata.co.uk/colour-lcd/5-0-high-resolution-ips-tft-with-incell-ctp- li12720t050ta3098


RTI Joins NXP GoldVIP S32G Vehicle Integration Platform


RTI Connext Drive Delivers DDS-based Communications Framework to Accelerate Prototyping and Testing of Real-Time Data for Software-Defined Vehicles


Real-Time Innovations (RTI), the largest software framework company for autonomous systems, today announced that the RTI Connext Drive® automotive platform is now available through NXP® Semiconductors’ GoldVIP program. NXP customers now have a direct way to access the technology to evaluate and test real-time data flows within and across their zonal architecture design based on the Data Distribution Service (DDS™) protocol. GoldVIP is NXP’s reference vehicle integration platform that accelerates S32G hardware evaluation and rapid prototyping efforts. With the addition of Connext Drive, developers and system architects can access real-time communications to quickly prototype and test specific zonal architecture scenarios. Connext Drive is optimized to run on the S32G2 platform, providing automotive developers with rapid, reliable data-centric communication on both Arm® Cortex®-A53 and Cortex-M7 Cores. Connext Drive is the automotive-grade, production-proven connectivity framework that provides the real-time, scalable and safety-certifiable platform for zonal architecture and future Software-defined Vehicles (SdV), connecting the entire system from the ECU to the gateway to the central controller. Built on the DDS standard, Connext Drive features an open, interoperable platform that works with ROS 2, AUTOSAR™ Classic and AUTOSAR Adaptive environments. This standards-based approach delivers enhanced performance and massive scalability, while lowering risk.


RTI 52 March 2023 Components in Electronics www.rti.com https://components.omron.com/eu-en RAILTEC SUPPORT’s modular construction makes it easy to configure different widths


OKW’s Updated RAILTEC SUPPORT Modular DIN Rail PCB Holders


OKW’s RAILTEC SUPPORT open PCB holders for TH35, TH15 and G32 DIN rails are now available in light grey as standard.


They are part of OKW’s RAILTEC C range of DIN rail enclosures for automation, Industry 4.0/Smart


Factory, building and safety technology, and HVAC systems. Applications also include automatic timers, sensors, relays, signal distribution, lighting controls, subrack interfaces, electronics modules, amplifiers and transformers.


RAILTEC SUPPORT comprises a modular system of end sections and intermediate parts that make it quick and easy to create open PCB holders in different widths.


These PCB holders are moulded from PA6 FR (30), a tough, high-performance plastic that offers V-0 flammability protection. They are available in two versions to fit 72 mm and 107 mm PCBs.


The end sections are available with or without a DIN rail mounting foot, and in widths of 16, 17.5 and


27.5 mm. The intermediate parts fit to the end sections and can be snapped together in series to achieve the desired support width. They are also offered in widths of 16, 17.5 and 27.5 mm. A separate DIN rail mounting foot is available for the intermediate parts.


Accessories for RAILTEC SUPPORT include four wall suspension elements designed to fit the various end sections.


RAILTEC SUPPORT’s new light grey standard colour brings it into line with other RAILTEC C DIN rail enclosures. The RAILTEC C range includes fully enclosed housings in four versions, offering a choice of free through passage and ventilation options. All four versions can be assembled quickly with snap-in enclosure parts and swift installation of PCBs and terminals.


OKW can supply all RAILTEC C enclosures fully customised. Services include machining, printing, laser marking, and installation/assembly.


For more information, view the OKW website: https://www.okw.com/en/Plastic-enclosures/Railtec-C.htm


OKW ENCLOSURES LTD 01489 583858 sales@okw.co.uk www.okw.com


www.cieonline.co.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62