Interconnection
high or sub-zero temperatures, as it passes from direct sunlight to - borrowing from Pink Floyd – the dark side of the moon. Clearly another interconnection option is required, and many times, the preferred option is a commercial off-the-shelf (COTS) device, which meet the performance requirements set out by organisations such as NASA or the military, but which may not have been fully qualified to those standards. Such devices are often orders of magnitude cheaper than fully-qualified defence parts, but are able to withstand the severe demands of the rugged environments they will be used in. There is another issue to consider. Connectors that carry full NASA approval may well have been designed 30 to 40 years ago. If you are operating in the commercial space market, a connector that was designed in the 1980s may not be the best component for your application in terms of size, weight, performance and cost (SWaP-C). Also, you may need to be able to source your parts for prototype designs from a distributor (such as Powell), which can supply sample quantities from stock. Hi-rel connector makers such as Harwin regularly have conversations with companies in the commercial space sector, which are desperately trying to move away from NASA and ESA standards, wherever they possibly can, exactly for this reason and because older connectors with various ‘hi-rel’ may not be fit for purpose any longer – what was suitable for the Voyager 2 spacecraft to investigate Neptune 40 years ago may well not be suitable for putting up a constellation of 300 low orbit communication satellites
to deliver broadband to Africa. It’s a totally different challenge.
So, it becomes obvious that we need a modern interconnect solution that has the environmental capabilities (shock, vibration, temperature) of Mil-Spec devices but with the space, weight and cost benefits of a much more recent design. Powell franchise Harwin plc is a long-established supplier of hi-rel interconnect solutions. The company retains all essential production elements in-house at its Portsmouth, UK, facility, so is able to guarantee the highest levels of quality. Some years ago, the company introduced the Gecko
1.25mm pitch connector family. These offered significant space savings over traditional Micro-D style connectors, and also, because they are of a rugged plastic design rather than metal, there are considerable weight and cost savings to be achieved.
Gecko-MT range
Harwin has continued to extend the scope of the hi-rel Gecko family with the introduction of mixed-layout versions. By complementing the data contacts with two or four power contacts (in power/data configurations of either 1+8+1 or 2+8+2), Gecko-MT
connectors achieve even more space and weight reductions in electronic hardware. Recently, Harwin also added six new contact arrangements that feature two to six power contacts and four to 24 signal contacts. These have a non-symmetrical structure, with the power contacts situated at one end and the data contacts at the other. All configurations have respective power and data current ratings of 10A and 2.8A max per contact. Gecko-MT connectors include female and male cable connectors, plus female vertical and male right-angle PCB connector options. These components are fitted with sturdy, stainless steel screw-lock fixings (in both conventional and reversed formats), to ensure ongoing interconnect integrity in even the most challenging of application environments. They have 20G vibration and 100G shock resilience and their operational temperature range spans from -65°C to 150°C. Low outgassing properties are also exhibited.
By encompassing both data and power in a single compact and lightweight solution, Gecko-MT connectors are highly optimized for avionics, defence, space, and motorsport. Among the key target applications are robotics, unmanned aerial vehicles (UAVs), battery management and satellites. They are available from stock and through Harwin’s distributor, Powell. In addition, cable assemblies manufactured by Harwin, are also available through Powell. Tooling for reliably attaching cables to connectors can be expensive, so the option to buy a complete, tested cable assembly offers users significant cost savings and increased peace of mind.
https://www.powell.com/
www.cieonline.co.uk Components in Electronics March 2023 33
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62
