TECHNOLOGY IN ACTION ADVERTORIAL


New FSC-1114 fuse blown indicating module T


he new FSC-1114 fuse blown indicating module, designed to distribute a supply voltage, is a DIN rail mounting module, that has 10 common indicating fuse


blown outputs. Each fused channel can handle up to 7.5A, with a maximum of 40A max for the module. In the event of a fuse being blown a relay is energized and the volt free contacts can be used to signal the problem to the SCADA system or raise a local alarm. The Daito blown fuse gives an indication that it is open circuit, individual Channel fuses purchased separately can be 1A, 1.6A, 2A, 3.2A, 5A or 7.5A. The module can be purchased for use with 110Vac or 12, 24, 48,


standards with new ClipX signal conditioner


N


ow available from HBM is the revolutionary new ClipX signal conditioner, which sets new standards in


industrial process control by simply integrating into existing machines and production systems. Designed to optimise production, ClipX is a dynamic


signal conditioner that not only amplifies signals but also completes preliminary calculations and summaries, to reduce the load on higher level controls. This means that ClipX is able to accomplish tasks that would otherwise be taken on by the higher-level controller. Suitable for monitoring and measuring tasks in test


benches, machines and production plants, ClipX can be used as a standalone device or as part of a system of networked devices.


HBM  01525 304980  www.hbm.com


Precision right up to the first sip T


HBM sets new


110 and 120Vdc power distribution The FSC1114 joins a range of other Colter Products SCADA friendly products signaling fuse status. Visit our website to view our power distribution and relay


products. The Supervisory system allows maintenance engineers to be quickly informed of the problem and the location when using the FSC1114.


Colter Products Ltd  01371 876887  www.coltergroup.co.uk


New accelerometer combines low noise with wide range from DC to 2,000Hz T


he new Type 8396A triax accelerometer from Kistler combines wide frequency range from, DC to 2kHz and exceptionally low noise with excellent linearity


and an integral signal amplifier for an analog voltage output all in a miniature, titanium housing weighing only 30 grams. With six ranges from 2g to 200g these new MEMS accelerometers are the answer to most demanding applications from automotive durability testing and road load data and aviation flutter testing to bridge structural monitoring and railway rolling stock testing and monitoring. The combination of wide frequency range, low noise and operating


temperature from-55°C to +125°C combined with small size and mass make the new Type 8396A triaxial accelerometer ideal for applications wherever very low frequency measurements need to be made accurately, even under varying temperatures in exposed, outdoor environments.


Kistler Instruments Limited  01256 741550


 www.kistler.com


Rapid and fault-free packaging of beverages thanks to backlash-free couplings and brakes


he beverage industry has to master substantial challenges: On the one hand,


consumers have an insatiable desire for beverages and consumption is correspondingly high. On the other hand, expectations are continually increasing for a more diverse, individual provision of refreshment beverages. Smooth processing, especially when palletising the filled beverages, is important in order to fulfil these requirements. Backlash-free, corrosion- resistant shaft couplings and safety brakes by mayr® power transmission enable precise processes with high repeat accuracy.


Mayr GmbH + Co. KG


No limits K


 08341/804-0  www.mayr.com


R200 and R201 The New Optical Sensors for Longer Operating Distances W New inductive proximity switches sense all metals at same range


plus is the name given by leading sensor manufacturer ifm electronic to their latest range of inductive proximity sensors. The


main feature of these is their reliable detection: long sensing range on all metals, there is no reduction factor. Addition reliability stems from the fact that the K = 1 correction factor


sensor technology is inherently immune to electromagnetic fields. This wide range of devices in standard M8, M12, M18 and M30 housings offers different lengths for different applications, all with flush or non-flush versions and all featuring an industry-standard M8 or M12 connector. These devices are suited to a numerous applications due to their wide operating temperature range and high


protection rating. Installation is made easier by the fact that the thread can be completely used with the lock nuts, right to the end of the housing thread. The robust design in high-grade stainless steel renders this range ideal for all applications.


IFM  020 8213-2234 CONNECTINGINDUSTRY.COM/AUTOMATION  www.ifm.com/uk


ith the R200 and R201 designs, the forward-thinking product design of photoelectric sensors from


Pepperl+Fuchs enables applications with longer operating distances. Just like the compact R100, R101, and R103 series, both new products consistently offer all photoelectric functional principles in a design that is now larger and suitable for specific mounting situations. Usability is intuitive and identical across all series—and the standardized IO-Link connection via the latest Smart Sensor Profiles also enables convenient and reliable integration of the sensors.


With the R100, R101, and R103 series, as well as the new


R200 and R201 sensors, choosing the relevant sensor is easier and users also benefit from maximum flexibility in every application and mounting situation. In terms of their technical features, the new series also include robust DuraBeam laser technology and high-precision Multi Pixel Technology (MPT) for distance measurement..


Pepperl+Fuchs GB Ltd.  0161 633 6431  www.pepperl-fuchs.co.uk


AUTOMATION | MAY 2018 37


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64