ADVERTORIAL TECHNOLOGY IN ACTION


Turnkey LXI microwave switch and signal routing subsystem service


If you can’t find the fault, take a closer look


components and assemblies. One of the biggest issues in non-destructive inspection


C


is getting a clear visualisation of the area of interest with sufficient resolution to be able to detect the smallest faults. A straight 2D image could mask issues where the correct low angle image can see them easily. Equally CT isn’t always the answer as the part in question may be in the middle of a large board. In this circumstance a high resolution reduced angle CT could give you the required images.


Our Nordson Dage Quadra 7 system, with 100nm resolu-


tion, full CT and tomosynthesis capability, can image the smallest of structures and our engineers are experienced in the analysis of the images and, if needed, reconstruc- tion into 3D models.


Cupio Services u 01256 262800 u www.cupioservices.co.uk


upio Services offers a comprehensive X-Ray, optical and acoustic non-destructive analysis service for electronic


new value-add turnkey LXI microwave switch and signal routing subsystems service. This new service delivers custom-engineered solutions created to customers’ specifications. These integrat- ed microwave test packages include switches, a dedicated soft front panel, all the wiring and more in a suitable enclosure. They are supplied fully tested, with full documentation and a three-year warranty. The service provides compact, rack-mounted, multiplexer, matrix and complex routing designs based on an indus-


P


try-standard LXI/Ethernet interface, designed and manufactured by Pickering’s team of switching experts. Solutions are available with bandwidths from DC to 67 GHz @ 50Ω, with terminated or unterminated options and bandwidths up to 2.5 GHz @ 75Ω. These cost-effective microwave switch subsystems are available on a fast turnaround. They are fully documented


to ensure performance repeatability when ordering additional systems. Pickering Interfaces


u +1 978-455-0376 u kim.otte@pickeringtest.com


Lattice Sentry Solutions Stack and SupplyGuard Service


attice Semiconductor Corporation (NASDAQ: LSCC), the low power program- mable leader, today launched the Lattice Sentry™ solutions stack and the Lattice SupplyGuard™ supply chain protection service. The Sentry stack is a


L


robust combination of customizable embedded software, reference designs, IP, and development tools to accelerate the implementation of secure systems compliant with NIST Platform Firmware Resiliency (PFR) Guidelines (NIST SP- 800-193). The Lattice SupplyGuard service extends the system protection provided by the Sentry stack throughout today’s challenging and rapidly changing supply chain by delivering factory-locked devices to protect them from attacks like cloning and malware insertion, and enables secure device ownership transfer. These hardware security solutions are increasingly important to a range of applications, including communications, datacenter, industrial, automotive, aerospace, and client computing. According to Patrick Moorhead, president and founder of Moor Insights & Strategy, “5G, Edge computing, and IoT


are accelerating the pace at which devices are becoming connected, and security concerns are on the rise among high-tech OEMs serving every market.’’


Lattice Semiconductor u www.latticesemi.com


Simple to install DIN-Rail Mounted EMC Cable Shield Clamp


the icotek LFC cable clamp with EMC shield connection for use on the industry standard 30mm DIN-Rail shape C.


F The new LFC cable shield clamp allows the cable shield to be connected directly to the DIN-Rail while allowing an


existing cable clamp to be used for strain relief. This cost-effective EMC shield clamp is easy to use and offers very effective earthing of single cable shields. Key features include space-saving assembly, no tools required, high vibration resistance, large clamping range from 3 to 30 mm, large shielding contact area, shield contact and strain relief separated and fits all standard DIN C-rails (16-17 mm). Icotek EMC cable shielding components and cable entry systems create secure connections for machinery and


equipment may be used in a wide range of industries and applications including smart buildings and factories, machine tools, railway technology, wind turbines, solar technology, vehicle construction and packaging machines, automation and robotics.


Foremost Electronics Ltd u +44 (0)1371 811171 u www.4most.co.uk


Nexperia announces next generation 650 V Gallium Nitride (GaN) Technology


next-gen high-voltage GaN HEMT H2 technology in both TO-247 and the company’s proprietary CCPAK surface mount packaging. Devices achieve superior switching FOMs and on-state performance with improved stability, and simplify application designs thanks to their cascode configuration which eliminates the need for complicated drivers and controls. The new GaN technology employs through-epi vias, reducing


N


defects and shrinking die size by around 24%. RDS(on) is also reduced to just 41 mΩ (max., 35 mΩ typ. at 25 °C) with the initial release in traditional TO-247, with high threshold voltage and low diode forward voltage.


Nexperia 38 u +31 6 137 111 41 JULY/AUGUST 2020 | ELECTRONICS u petra.beekmans@nexperia.com


experia, the expert in essential semiconductors, has announced a new range of GaN FET devices featuring


(BGA) socket and adaptor systems. From 1.27mm down to 0.3mm pitch versions and solu-


T


tions for terminating BGA, LGA, QFN, LCC and QFP devices, Selwyn can offer an economical method of device valida- tion and development where soldering the device to the PCB is not practical. Alongside the low insertion force socketing systems, is


range of adaptors onto which the device can be soldered and then loaded into a socket or pinned out to a custom footprint, this also subjects the device to a lower thermal stress level than soldering direct to a PCB. If you can provide the details of your device, we can provide a socket/adaptor solution for you.


Selwyn u 01732 765100 u www.selwyn.co.uk


CONNECTINGINDUSTRY.COM/MAGAZINE


Socket your BGA’s with Selwyn Electronics….


he Interconnection Specialists, Selwyn Electronics are pleased to offer an extensive range of Ball Grid Array


oremost Electronics, the engineering-led Essex based importer and specialist distributor of electromechanical components, announces the availability of


ickering Interfaces, the leading supplier of modular signal switching and simulation solutions for use in electronic test and verification, launches a


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46