TECHNOLOGY IN ACTION ADVERTORIAL
100nm X-Ray Resolution and 4K Display
mall defects in your soldering or bonds can be difficult to see. They aren’t with our latest 100nm X-Ray solution. With 4K imaging, 100nm image resolution and a power of up to 20W you can be sure that you can see the tiniest of defects. Essential in failure analysis or critical component assemblies, the Quadra series of X-Ray systems also provides the highest resolution for CT and tomosynthesys, with instant filters and analysis software. Having the best picture is vital for manual defect analysis but the software available on the system can automate those tasks for repeat inspection or small production runs. Nordson Dage provides advanced software for viewing layers through a component or board and actual and reconstructed computer tomography for a full 3D view. Functions are available for automatic checking of voids or solder fill and pictorial or measured result outputs are available.
S
Cupio Ltd 01962 832654
www.cupio.co.uk
accuracy and ease of use to make the CrimpTest-1 kN a high-reliability everyday tester, requiring minimal training and maintenance. Motorised pull testers improve accuracy and reduce operator strain and injury. For added safety, this ergonomically-designed horizontal tester pulls samples away from the user. A single button press runs a test, and just 4 multi-function buttons provide for all settings, operation and output to an RS232 statistical printer. Peak force at break is displayed along with clear pass and fail indication. Four speed settings are available: 25, 50, 100 and 200 mm/min. to comply with all regular test standards. Units of force can be displayed in N, kgf or lbf. This competitively-priced bench tester is designed for continuous use within the production environment, and is IP52 rated against ingress from dust, wire fragments and water. Versatile fixtures are available for pull testing crimped, soldered or welded terminals, and cable ties, to 1 kN.
New digital wire crimp pull tester A
new rugged and rapid-throughput tester for quality testing wire terminal strength is available from Mecmesin Ltd. Simple controls combine with
Mecmesin 01403 799 919
www.mecmesin.com
In2Connect supply rectangular and circular connectors
sensor/actuator connectivity in factory automation, process control, and industrial instrumentation. The screw locking M12 style connector has from 2 to 8 contacts and is IP67 rated so can be well suited for moisture-laden environments. Field attachable connectors have the freedom and flexibility to react to the cabling situation on site or to enable building your own M12 cables. M12 connectors may also be coded by application. As well as M12, In2Connect’s range of connectors include M8, 7/8”, Rund24, M23, tooling and junction systems, adapters and splitters.
R
Download our Product Line Card from:
http://www.in2connect.uk.com/res/In2Connect%20Line%20Card%202016.pdf
In2Connect UK Ltd 01962 773004
www.in2connect.uk.com ugged, compact, sealed M12 connectors are popular for
SUSUMU, to be precise! S
usumu’s KRL series of thin film high precision metal foil low resistance current sense chip resistors offer a high power current-sense solution in a small package.
Available in resistance values between 1m and 500m , the KRL series offers resistance tolerance as low as ±1%, and with a temperature coefficient as low
as ±50ppm/°C. Featuring high current handling, a choice of operating temperatures, and power ratings from between 0.5W and 10W, the range is available in both long and short side terminals and also comes in a 4- terminal form. The KRL series is AEC-Q200 compliant making it an ideal fit for automotive applications, as well as power, motor and inverter solutions.
The RG series is Susumu’s flagship metal thin film
chip resistor and offers the highest reliability and precision. By using inorganic passivation the RG series achieves long term stability and offers an impressive 0.1% drift after 10,000 hours. This series offers tolerances as tight as 0.05% and a small TCR of 5ppm/ºC making it a great fit for a variety of applications including sensors, industrial and medical. The RG series is also AEC-Q200 compliant making it well suited to automotive applications.
Gateway Electronic Components Ltd 01270 615999
www.thecomponentgateway.com
/ ELECTRONICS
DC Electronic Loads- Go High Performance
New range of High Performance/ High Speed DC Electronic loads from Kikusui
he Kikusui PLZ-5W Series high performance/speed electronic load is the successor to the highly respected PLZ-4W series, whilst still retaining the same high specification and build quality. Advances include a high visibility colour display, low voltage operation from a minimum of 1 V to a maximum of 150 V (Lower Input voltage possible at reduced current). Programmable profiles of voltage/current can be applied (using the new ARB function, as used in LED/solar testing) in addition to the inherited 6 modes of operation: Constant Current, Constant Resistance,
T Constant Voltage, Constant Power,
Constant Current + Constant Voltage, Constant Resistance + Constant Voltage.
Telonic Instruments 01189786911
www.telonic.co.uk
ELECTRONICS | FEBRUARY 2017 29
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44
