SPONSORS WHAT’S NEW Adveco extends MD boiler range H


ot water and heating specialist Adveco, adds 10 new highefficiency wall


mounted models to its popular MD condensing boiler range, with rated heat outputs of 15, 24, 34 and 60 kW for light commercial applications. The wallmounted variants of the


MD offer the same highquality patented titanium stabilised stainlesssteel heat exchanger construction for exceptional strength and corrosion resistance, ensuring greater longevity. All the


MD boilers feature efficient premix burner technology to help control operational costs and significantly reduce NOX and CO emissions. The MD15, MD24 and MD34 have


two variants to accommodate either central heating only or DHW via an indirect water heater. A third variant of the MD24 and MD34 includes an integrated Plate Heat Exchanger for instantaneous DHW. The 60kW heat output MD60, available with or without an integrated system pump, is designed to meet the demands of commercial central heating.


Unlike many wallmounted


boilers, the compact MD offers integrated run/fault signal for connection to a BMS system. With 010 V input on the MD, a BMS system incorporating interior/exterior sensors can deliver automated heating control. The range is supported by a


sevenyear parts and labour warranty when boilers are commissioned by Adveco.


www.adveco.co


Belimo sets 100 Million Milestone


success story. All of these products optimize energy efficiency in buildings without sacrificing comfort. At the beginning of the year,


B


Belimo delivered its 100 millionth actuator and in doing so reached another milestone in the Company's history. The Swiss world market leader for field devices for controlling and regulating heating, ventilation and airconditioning systems confirms its growth course by reaching this milestone as well as the demand for innovative products that sustainably increase comfort, energy efficiency and safety in buildings. Lars van der Haegen, CEO of


Belimo, emphasizes that not only are the best products and world class logistics needed to sell this high number of actuators. Employees who continuously aim to offer customers more value than they expect are also essential. Belimo always manages to increase both energy efficiency and comfort, explains van der Haegen. “It's about technical innovations and their impact on sustainability. Buildings are responsible for 40 percent of global CO2 emissions, with proper building controls systems, energy savings of up to 50 percent can be achieved compared to buildings without". Even the 100 millionth actuator


produced offers the same sustainable added value for customers, a PR actuator,


Simply saving energy with DANLERS


microwave switches D


which was made as an anniversary product. The PR actuator is part of a motorized butterfly valve that is used in water applications and, thanks to a power consumption of only 20 watts, it reduces energy consumption by over 80% compared to competitive products. "We are proud to look back on 100 million actuators. Our customer's great trust in us and partnerships have made this possible and we want to thank them for this joint success," van der Haegen concluded.


www.belimo.com/100million


decorative hardware retail packs, ideal for builder’s merchants. The retail packs enable


E


merchants to now display the product either via dedicated Fab&Fix merchandising units or via their own display units, showcasing the full range. Designed so that the builder can see exactly what they’re getting immediately, the packaging includes an explanation and a


RA, the UK’s leading home security specialist, has developed its Fab&Fix


show window displaying the superb quality and matching finish.


Perfectly matching Fab&Fix offers the industry’s first set of perfectly matching, durable hardware – allowing the sleek and professional finish that customers are constantly demanding to be achieved. With three decades of realworld


testing and featuring truly matching products, the Fab&Fix range of decorative hardware incorporates four distinct lines: Classic, Heritage,


Architectural and SSeries, thereby ensuring a coordinated finished look for any application.


Durable Hardex finish The industryrenowned ‘Hardex’ surface finish technology is only available on the Fab&Fix range. This resilient coating has surpassed 1,000 hours of prohesion testing, making it one of the most durable finishes available. The range offers a ten year complete peace of mind guarantee, which covers function,


ANLERS have launched a new range of cost effective midrange Microwave presence detection switches for the automatic control


of lighting and ventilation. The products detect movement within the


detection area and control the load accordingly. Each product is suitable for switching most lighting loads including LED and have a detection range of up to 12m. MWCEFL is suitable for flush mounting into false


or plasterboard ceilings. MWCEFL has a snap fit cover allowing for easy adjustment of time lag and lux level functions. Its slim profile is visually unobtrusive making it suitable for corridors, offices, washrooms etc. MW6A2C IP67 and MW2A IP67 are IP67 rated and


are suitable for surface mounting on walls or ceilings. With an operating temperature range of 30 ºC to 70ºC these controls may be suitable for cold storage facilities as well as factories, warehouses etc. MW6A2C IP67 has two channel output for controlling two separate circuits such as lights and fans. Call: 01249 443377, email: sales@danlers.co.uk


or visit: www.danlers.co.uk Fab&Fix decorative hardware ideal for builders merchants


elimo celebrates 100 Million Actuators delivered Worldwide, continuing its


visitor attraction in Edinburgh involved the replacement of the existing 25year old burners with Riello ultralow nitrogen oxides (NOx) premix burners. The Riello RX1800


A


1.8MW premix burners, commissioned by contractor T Squared, have shown exceptionally low NOx levels of just 910ppm (around 20mg/kWh) throughout the modulation range. This is around half the 40mg/kWh maximum required by some local authorities and also below the BREEAM criteria of 24mg/kWh. Consequently, the burner upgrade enabled the aging castiron sectional boilers to comply with current and anticipated NOx regulations, as well as improve energy efficiency – thereby


burner upgrade project at a prestigious


Advertorial BSEE


Riello Premix Burners improve heating performance at prestigious Scottish site


extending the life of the boilers. “The client was very


keen to improve energy efficiency and meet future standards for NOx emissions, while retaining the existing boilers for a few more years,” explained TSquared’s Garry Wallace. “We


therefore suggested replacing the older burners to achieve better turndown and temperature control with improved efficiency and reduced NOx emissions. We considered several manufacturers and selected Riello on the basis of product quality and performance, technical knowledge and customer support. “We have also upgraded the


metering, which will enable the client to monitor gas consumption and confirm the expected 2year payback period is being achieved,” he added.


www.rielloburners.co.uk


Lochinvar launches advanced electric water heating range


performance electric floor standing storage water heaters for commercial and large residential applications. Cavalier water heaters are


E


available in seven models all of which meet the requirements of the EcoDesign (ErP) directive and can operate at working pressures of up to 8 bar. These fully


finish and forms part of ERA’s ‘Total Security Guarantee’. Call 01922 490 000,


email info@eraeverywhere.com or visit:


www.eraeverywhere.com Pegler increases valve offering with mini MVS


launched a mini modular valve solution to support contractor efficiencies within fan coil units. Shaun Burrows, technical product manager


C


at Pegler said: “This new valve solution offers a smaller pipe centre of 40mm and has been reduced in size to ensure direct connection to fan coil units is possible while ensuring the products sits within the confines of a drip tray.” The mini MVS is part of a standard range by Pegler and has 12 configurations.


It is available as left or right handed, with strainer


ontinuing on from the launch of its hugely successful bespoke valve configuration service, Pegler, has


or without and comes in the standard three flow variants, low, standard and high. Also included is a choice of indicator either for heating or cooling. There are also convertor kits available with the mini MVS for solder, compression male thread or push and press connections. Furthermore, the mini MVS range is


manufactured from DZR brass with union joints to allow valve orientation to be changed onsite with a builtin test point to allow flow rates and signals to be measured to ensure system design flows can be set. The complete mini unit still allows connection, regulation, isolation, flushing and draining for fan coils.


Read the latest at: www.bsee.co.uk


packaged water heaters represent a significant advance for this type of technology because they feature factory fitted multiple immersion elements for rapid hot water production. This ranges from three 3kW elements in the lowest output model (9Kw) up to nine 6kW elements powering the highest output (54kW) water heater, which is capable of providing up to 929 litres of continuous hot water per hour at a temperature rise of 50ºC. The immersion elements


operate in sequence to provide fast recovery of hot water and better efficiency, especially during offpeak demand periods. The independent operation of each element provides standby in the unlikely event of any individual element failure. Cavalier water heaters also


work seamlessly with Lochinvar’s Amicus range of heat pumps when installed as part of a ‘hybrid’ system, making them ideal for projects requiring a hot water solution with zero onsite emissions. As they produce no on site carbon or NOx emissions, they are BREEAM and ‘London Plan’ compliant. Storage capacities are either


For further information visit: www.pegleryorkshire.co.uk


200 or 300 litres and the enamelled steel storage vessels include an integral magnesium


stablished water heater manufacturer Lochinvar has launched a range of high


anode for cathodic protection. They are insulated with 65mm polyurethane foam and encased in an enamelled grey jacket to ensure heat losses are substantially lower than the standard required by Part L of the Building Regulations.


The Cavalier range is designed


for ease of maintenance with all of the electrical components accessible from the front of the units. “This product is an important


addition to our portfolio as we are seeing growing demand for all electric, zero onsite emission solutions in a wide range of buildings,” said Lochinvar sales director Liam Elmore. “High efficiency electric


products like this are the most convenient installation choice in many projects. The rapid decarbonisation of UK electricity supplies is further strengthening their case,” he added. “When combined with heat pumps, they tick all the boxes for energy, environmental protection and running costs.”


www.lochinvar.ltd.uk BUILDING SERVICES & ENVIRONMENTAL ENGINEER MARCH 2020 39


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50