Ventilation ducting: overlooked & undervalued AIR CONDITIONING, COOLING & VENTILATION


Paul Williams, Domus Ventilation product manager explores why ducting can make or break a ventilation system, whether it’s a sophisticated mechanical ventilation with heat recovery (MVHR) system in a large house or a simple bathroom fan in an apartment


D


ucting conveys the all- important fresh air to (and from, in the case of MVHR) the ventilation unit and into the property. If the air flow is impeded in the duct run,


insufficient air reaches the fan in a timely way, and the property does not receive adequate ventilation. Maintaining air flow at a set level is especially important in whole house ventilation systems as otherwise the systems will not perform to their best ability.


Why does ventilation matter?


Good ventilation is at the heart of indoor air quality (IAQ). As more resources are being invested into researching IAQ (although this is still well behind research into external pollutants), an ever clearer picture is forming of the impact IAQ can have on both our physical and mental health.


Poor IAQ can lead to an increased risk of


respiratory and cardiovascular illness, cognitive impairment and even certain cancers. One of the big problems with IAQ is that sources and


concentrations of pollutants can vary greatly between as well as within buildings. Indoor pollutant sources include building materials, Volatile Organic Compounds (VOCs) heating appliances, cooking, consumer products, occupant activities and damp. Of course, the indoors is also affected by the outdoors, with external air pollutants entering our homes; this is likely to be an even greater issue in urban areas in warmer months when windows are wide open. Whilst removing or reducing pollutant


sources is fundamentally important (such as through the implementation of Clean Air Zones and switching to greener cleaning products), improving ventilation within our


homes is essential to IAQ. It brings air into the property, dispersing existing air out and diluting any pollutants in the process. Where whole house ventilation systems are installed, filters can be applied to the intake to remove external pollutants.


Choose ducting wisely


I’d like to think that most people in this line of work invest time into researching whole house ventilation systems and, hopefully, into their choice of extract fans. But has similar time and effort been spent into researching ducting? Quite possibly not. As I have stated above, ducting is at the heart of a successful ventilation system, so it is important to take the time to ensure you choose duct systems wisely. There is no set standard for ducting, but poor quality ducting is relatively easy to spot. If the ducting bows or looks like it’s concave, or the wall thickness appears uneven, avoid it as it will not provide a tight fit when connected, leading to air and even condensation leakage. Good quality ducting will have exacting tolerances and connects together for minimal air and moisture loss and maximum system efficiency. It will also come with ample accessories and useful products designed to assist you with site related constraints. Make sure the ducting has been designed to work in harmony as part of a system and has been third party tested for end-to-end system performance.


For MVHR and MEV system, use quality rigid ducting in larger sizes. But whatever you do, and whatever size the ventilation system, avoid using flexible duct work in place of rigid ducting at all times, as it causes a lot more air resistance and can be crushed easily.


Drawing duct schemes require skill


Many people misjudge the level of skill required to produce ducting drawings. The duct runs, the number of bends and the angle of those bends, plus the temperature of the areas the ducting runs through, all affect the air flow. It’s important to keep ductwork runs as short and straight as possible, and minimise the number of bends. This can best be achieved if you produce the drawing before the ventilation unit is specified and before services, such as gas and water pipes, go in. Make full reference to dwelling and room ventilation rates within the drawing.


8 BUILDING SERVICES & ENVIRONMENTAL ENGINEER APRIL 2025 Read the latest at: www.bsee.co.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42