ADVERTORIALS
FAST & ACCURATE TEMPERATURE MONITORING WITH ATC SEMITEC’S INLINE IN-FLOW COOLANT TEMPERATURE SENSORS T
he TKS inline coolant sensors, from ATC Semitec, offer a neat temperature monitoring solution for cooling systems in the e-vehicle/ automotive industry. This temperature sensor is sealed directly into the pipe assembly providing both ease of installation and accurate temperature monitoring. Liquid cooling systems in EVs play an important role in optimising the performance of batteries and powertrains. Therefore accurate temperature
monitoring of the fluid in the coolant loop helps the thermal management system maintain the optimal operation of batteries and other components. Installed within the inlet or the outlet hoses, this sensor directly, quickly and accurately measures the temperature of the coolant as it flows past its sensing tip - providing a rapid response (Tc ± 15s) with a ±1% accuracy NTC thermistor as standard. They have a general operating range of -40°C to 125°C.
Alternatives such as clip-on sensors measure temperatures indirectly and therefore may not be as responsive or as accurate. These form part of a wide range of temperature sensors from ATC Semitec.
ATC Semitec Ltd
www.atcsemitec.co.uk
TITAN ENTERPRISES EXPANDS PATENTS FOR ITS ULTRASONIC FLOWMETER TECHNOLOGY
T
itan Enterprises has been granted additional patents for the ultrasonic flow technology used in its Atrato, MetraFlow and Process Atrato flowmeters. Most ultrasonic flowmeters can reliably measure fluids that transmit ultrasonic sound waves within a band around the speed of sound in water at 20°C. But if a fluid has differing acoustic characteristics the acoustic
operational window can be missed by the sensors. Titan’s Interface Software offered on the Atrato and MetraFlow overcomes this challenge. The software allows you to view the Acoustic signal of the measured fluid in real time and if required, move its position in the measurement window to ensure reliable flow measurement. The Atrato and MetraFlow are ideal for almost any low flow application. In addition, the Process Atrato, constructed from 316 stainless steel and PEEK, and incorporating Titan’s time-of-flight technology, is designed for use in demanding process and control environments.
Titan Enterprises
flowmeters.co.uk
SELWYN ELECTRONICS A
s a specialist supplier of connectors and cable assemblies for over 30 years, and with particular emphasis on engineering support, Selwyn Electronics has always kept up to date with market trends and new technologies, to ensure that their range of products evolves with these changes. Below are just a part of the extensive range that they can offer.
Waterproof Connectors • IP65 to IP69 rated • Plastic and metal • Circular, USB, RJ45 • 2-50 Amp rated • Moulded assemblies
Circular connectors • Plastic or metal housings • Vibration resistant • IP50 and IP68
• Cable assembly service • Various polarising options
Cable Assemblies
• 2 factories, UK and Far East • Both facilities ISO9001 approved • 100% electronically tested • Test certificates on request • Complete cable solutions
BGA Sockets and Adaptors • Various locking systems • 0.5-1.5mm pitch • Custom footprints • Compression contacts • Socket/adaptor systems
Selwyn Electronics
http://www.selwyn.co.uk/
GENESIS: THE BIRTH OF A NEW TYPE OF PROFILER
M
agnetrol’s revolutionary multiphase detector, Genesis, is a Time Domain Reflectometry Device (TDR) based level detector designed to accurately define and quantify the various layers in multiple interface level measurement.
Encompassing a number of significant engineering developments from Magnetrol’s progressive engineering team, this innovative level detector can deliver a full interface profile of a vessel with performance which surpasses many of the more traditional technologies.
Utilising patented “Top -Down” and Bottom-Up” signals, long with advanced level detection algorithms, Genesis can be deployed in a wide variety of interface applications ranging from very light hydrocarbons to water-based media. For example, Genesis can be used to define the multiple interfaces in a separator vessel (Sand – water – emulsion – oil – gas) with exceptional precision and can even identify the magnitude of any emulsion layer.
The device utilises pulses of electromagnetic energy transmitted along a physical probe. From a “Top-Down” perspective, when a pulse
reaches a surface that has a higher dielectric constant than air (r = 1), a portion of the pulse is reflected. The time of flight of the pulse is then measured via high-speed timing circuitry that provides an accurate measure of the liquid level. The amplitude of the reflection depends on the dielectric constant of the product, with a higher dielectric constant yielding a larger reflection. In addition to sending high frequency energy down the probe to detect upper (or total) level, the Genesis sends energy up the probe to detect various other levels that may be present; including the top of an emulsion layer, bottom of an emulsion layer (water level) and sediment.
Magentrol’s Genesis is available from ABLE Instruments. Call on 01189 311188 or email
info@able.co.uk for more information.
ABLE Instruments 01189 311188
able.co.uk
72 February 2023 Instrumentation Monthly
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82
