Feature sponsored by Test & measurement
As well as high-volume solutions with throughput rates of several hundred parts per minute, we also supply scalable systems for very low or medium production output. This is because clinical studies and assembly tests have to be carried out in various stages before a medical device is launched on the market and mass production can really get going.” To ensure maximum flexibility and efficiency, Mikron Automation opts for a modular platform approach, following the example of the automotive industry: standardised base machines are designed and specified to suit each customer’s requirements and every application.
HIGH-PRECISION ASSEMBLY, INCLUDING PROCESS DOCUMENTATION
In a project currently in progress for a major pharmaceutical company, Mikron is using electromechanical joining systems from Kistler integrated into two manufacturing cells. Jörg Besold has been a project manager at Mikron for almost five years. Together with a core team of about ten people, he is responsible for all the steps in the design and development process – from project kick-off through to final acceptance at the customer’s site. This is how he describes the requirements: “To assemble an autoinjector, several plastic parts and a syringe have to be assembled together in a process that must be accurate and controlled. We’re using twelve servo presses from Kistler for one cell, and six more for the other cell. That allows us to triple the steps needed so we can achieve the desired volume of over 100 parts per minute.”
The NCFT joining module from Kistler is an electromechanical servo press that was specifically designed for small forces in a wide measuring range from 0.05 to 1.5 kN. It can be combined with the maXYmos NC process monitoring system to achieve complete control of all movements and forces, including detailed process documentation based on piezoelectric force measurement.
“We already had some previous experience of using force-displacement sensor technology from Kistler combined with the maXYmos system,” Besold recalls. “But in view of the demanding requirements for this project, we opted for the high-end solution. It provides control of forces and positions at every point in time, as well as comprehensive process data for every product. Because the modules are integrated directly into the automation environment via OPC UA, we’re able to manufacture two product variants simultaneously. The machine control sends the different parameter sets to the maXYmos NC units that control the joining modules.” All the production data and quality parameters are stored in a database, and a matrix code engraved into every product guarantees 100 percent traceability for the end customer. Mikron has also integrated quality testing for each individual step into both assembly cells – an additional feature that ensures a very high standard of quality, for the benefit of the patients who will use the device.
CUSTOMISED DESIGN MEETS CHALLENGING REQUIREMENTS “We’re highly satisfied not only with the solutions from Kistler, but also with the valuable support they give us. With project lead times of nine to twelve months or more, we need a reliable, professional partner who can support us throughout the various phases,” Besold points out. As this was the first time that Mikron had used the NC joining systems, a joint workshop was staged at Kistler’s headquarters in Winterthur. Besold continues: “Even though the maXYmos systems are simple to integrate, it was especially useful for our software engineers to learn how the entire joining process is synchronised with the machine and optimised.” Given that the solution is intended for use in medical environments, additional adaptations were implemented to meet the relevant requirements. André Signer, sales engineer at Kistler, explains: “First, we integrated a functionality to track and back up all user changes to the system – this is what’s known as an audit trail, and it’s absolutely essential for medtech applications. Then we prepared our NCFT system for production in class 7 cleanrooms. And finally, we had to replace the lubricants in all the modules to ensure compliance with the requirements.” Following a successful assembly test and release by the end customer, the automation solutions from Mikron are being handed over and mass production can start. Besold sums up: “It’s not by chance that Kistler has a reputation for high precision: these joining systems provide excellent process control for our complex assembly operations, and that’s why we’ll certainly continue using them in the future. And it was also thanks to the systems from Kistler that we achieved very high levels of quality assurance and traceability in this project.”
Kistler Instrumentation Monthly February 2023
www.kistler.com 51
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82
