Editor’s choice
Measure analyse report solve
According to the Carbon Trust, cash savings of up to 20 per cent can be achieved through energy efficiency measures such as installing variable-speed drives (VSD) for fans, pumps, and other motor driven systems. But, a one size fits all approach to energy savings just will not do. Here, John Mitchell, global sales and marketing director at CP Automation, explains how plants should measure their energy usage to find the best energy saving opportunities
management system. To make energy savings, a plant manager must first understand their facility’s energy usage. It sounds obvious, but in reality, achieving energy control and crucial ongoing energy savings requires a strategised approach. The first step is to measure your energy usage. Many modern distribution and energy management systems already incorporate energy monitoring and logging facilities. However, they may only have a limited amount of memory and are unable to store results over an extended period. In addition, many integrated monitors only store summarised data that do not provide the level of detail
T
he ISO 50001 standard requires organisations to establish, implement, maintain and improve an energy
needed for effective energy optimisation. Portable power and energy loggers (PELs)
provide a convenient and cost-effective alternative, with far superior capabilities. These PELs, from Chauvin Arnoux for example, can be installed in several different locations, with data from different processes or equipment available on a single screen. A real benefit of these modern devices is that equipment does not need to be turned off and isolated during the installation process. The next step is carrying out an energy
audit. The data from the PEL will show where the most energy is being used in your plant and consequently where the most potential for energy savings can be found. The results from this report will inform the type of improvements to implement and crucially where they should be implemented.
Energy saving opportunities can fall into two broad categories, those that relate to the workplace environment and technical aspects of the electricity supply. For example, a plant could improve the efficiency of the workplace environment by cutting down on unnecessary out- of-hours usage by switching to LED lighting with occupancy sensors. On the other hand, an energy audit may find that a motor is consuming a high amount of wattless or useless power. In this instance, power factor correction would need to be installed to reduce this wastage, without compromising the performance of the equipment. It is one thing implementing energy savings,
but it is also important to continually monitor your system to ensure you are getting ongoing energy improvements. Plants should also formulate a metering plan to measure and analyse energy usage over an extended period of time. This will assess whether the chosen energy efficiency measures have been effective or whether further improvements can be made. Plants may choose to implement energy
efficiency schemes for a range of reasons. While there are several universal energy saving fixes, it is important that facilities use a targeted approach, which accurately monitors their systems to achieve the most effective energy and cost saving potential.
CP Automation 10
www.cpaltd.net September 2020 Instrumentation Monthly
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78
