Displays TacTile feedback


A common objection to all types of touchscreen is that they do not provide tactile feedback in the way mechanical controls do. This can be a drawback, for example, if a user is looking away when operating the screen, which can result in accidental touches. A feature within the ZXY500 projected


capacitive touch controllers which addresses this issue is “force” sensing. Zytronic has developed custom touch detection firmware which responds to the increased surface area of a fingertip when pressed more firmly onto the screen and differentiates its output accordingly. Software developers can then use the graduated information from the controller to activate different functions depending on the applied pressure, such as issuing an audible message alerting the user to the option selected when the screen is touched lightly, and then confirming the choice when pressed harder. So, for example an instrument can say ‘temperature’, ‘pressure’ or ‘time’ as the user’s finger moves across the screen. Once the finger is over the correct option, a firm press makes the selection, without the risk of an incorrect touch.


near invisible to the human eye on a powered display. These electrodes are connected to the remotely mounted touch controller, which applies a small charge to the sensing array. When a finger, conductive stylus or known object approaches the front surface of the sensor, a change in the charge applied to the conductive matrix is detected at the crossing points within the sensing array. This induced change is largest immediately beneath the touch points, and the touch controller’s firmware algorithms filters interference, calculates the applied touch positions and rapidly conveys this data to the host computer in a stream of X-Y positional co-ordinates. Zytronic’s experienced team of engineers


have designed all three elements of the touch solution to work optimally together: the sensor, the controller and its embedded firmware.


Touchscreen design


In addition to directly improving performance, this new generation of ZXY500 touch controllers combined with Zytronic’s flexible p- cap manufacturing process, provides system designers with limitless opportunities to customise the appearance of the user interface irrespective of quantity, optimising it for the application and helping to differentiate the overall hardware from competitive products. The new controllers allow the border


around the perimeter of the touch active areas of the screen to be substantially reduced – for example, a touch sensor designed for a 55” display can now be designed with sub 10mm borders, helping to reduce the user interface ‘footprint’ – useful, in applications where space is limited.


Instrumentation Monthly March 2019


Zytronic has been able to achieve this border reduction through proprietary new touch detection algorithms in firmware which allow the transmit and receive electrodes in the sensor borders to be located far closer together without creating interference or “cross-talk”. The ZXY500 controllers also now make it


possible to design “soft” keys around the edge of the dynamic active area of the projected capacitive touchscreen. These fixed touch “buttons” are managed by the same controller and their function can be defined by the system designer – for example keys for dimming/increasing brightness or raising and lowering volume. This is useful in applications where sealing and water ingress via mechanical controls could be an issue. It also enables designers to use smaller, cheaper displays, while still retaining touch interactivity around the perimeter of the screen in a single, unbroken surface. The new p-cap controllers support up


to 80 simultaneous touches, enabling true multi-user interactivity and improved “palm” rejection capability, i.e. detecting and ignoring anomalous touches, such as an arm resting on the screen. The Zytronic proprietary ASIC within the ZXY500 controllers also increases the speed of touch detection, updating touch co-ordinates in just 1ms at the controller output – reducing touch latency by a third compared to the previous generation controllers, and improving the overall user experience. They can also reliably detect touches through more than 8mm of overlaying glass - even with gloved hands, and are unaffected by rain, salt water, oil or ice on the surface of the touch sensor.


sysTem inTegraTion and communicaTions


A key factor in the success of a user interface design is how easy it is to integrate the controller into the rest of the system. USB is an extremely popular interface, but there are some applications that require RS232, I2C or SPI interfaces. Size is also an important consideration, and the smallest p-cap controller in the new ZXY500 range has been significantly reduced in size to just 61 x 64mm to support Zytronic touch sensor sizes up to ~19”. The flexible printed circuits (FPC) connecting the touch sensors to the new controllers have also been reduced to just 120mm in length, further simplifying integration. Finally, the new controllers have been designed to be HID (Human Interface Device) compliant and offer ‘plug-and-play’ operation with later Windows operating systems, also supporting Linux and Android builds suitable for multi-touch input.


conclusion


The latest Zytronic projected capacitive touch controllers set a new standard for performance, enabling sensors to operate reliably in industrial environments from which they were previously excluded. Even in demanding conditions with high levels of EMI and exposure to contaminants, the touchscreens provide a rugged and responsive user interface. They are ideal for outdoor and unattended applications where it can be fully protected from physical damage and environmental factors without compromising performance.


Zytronic zytronic.co.uk 57


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80