ADVERTORIAL TECHNOLOGY IN ACTION
General purpose accelerometer with internal temperature sensor
W
TECHNOMET - Advanced New Instrument Enclosures
M
odern and highly attractive aluminium instrument enclosures for desktop and portable electronic
instruments. TECHNOMET is available in eight standard sizes (ranging
from 75 x 225 x 200 mm to 150 x 350 x 275 mm) and in two standard colours light grey or anthracite. All sizes are available with or without a tilt and swivel carry handle bar. The stylish diecast front and rear bezels fit flush in the case body. Unique front and rear snap-on trims hide the front panel and case fixing screws, giving a modern screw- free look to the housings. PCBs can be fixed to M3 mounting pillars in the base, or clip-in anti-vibration guides in the chassis. Ventilation holes are provided in the base and rear panels. All panels are fitted with M4 earth studs for electrical continuity. Non-slip ABS feet are supplied fitted (with tilt legs on desktop versions). Anodised aluminium front panels are ordered separately. Prices start at £73. TECHNOMET can be supplied fully customised to customer requirements including special sizes.
METCASE Enclosures 01489 583858
www.metcase.co.uk
ilcoxon’s data collector powered dual output 786T sensor measures both acceleration and temperature. This is useful for acquiring data with any one of
the many portable analyzers for collecting predictive data for vibration spectrum analysis. The temperature sensor is powered through the accelerometer powering circuit and provides the DC voltage output proportional to the temperature in degrees Celsius. Top exit, general purpose, dual output with temperature, 3 pin MIL-C-5015 connector, case isolated, 100 mV/g, ±5% sensitivity tolerance. Key features – rugged design, corrosion resistant, hermetically sealed, case
isolated, ESD-protected and reverse wiring protection. This accelerometer will help extend bearing life by simultaneously measuring
vibration and temperature, enabling plant managers to schedule preventative maintenance and planned downtime.
KDP Electronic Systems 01767 651058
www.kdpes.co.uk
High-Precision Fluxgate Magnetometers B
artington Instruments offers a range of single and three axis fluxgate sensors, power supplies and data
acquisition units for low magnetic field measurements. The range includes sensors that can measure field
levels up to ±2mT and frequencies up to 12kHz, with noise levels down to 4pT. Cryogenic and vacuum compatible magnetometers are also available. The power supplies and data acquisition units are designed to optimise the performance of Bartington
magnetometers. These include analogue and digitising units, and power supplies handling up to 10 sensors. Applications include compass safe distance testing, ambient field monitoring for EMC compliance for fields up to
5kHz, remanent magnetisation measurements, and field uniformity checks during electro- and superconducting magnet manufacture. A range of Helmholtz Coil systems is also available. Typically these are used in laboratories to create stable and homogenous magnetic fields for magnetic instrument calibration and testing.
Bartington Instruments Limited
EUROLEC REVEALS NEW WARRANTY AND AMBITIOUS PLANS FOR 2018
F
ollowing on from a successful buyout by Scientific Measurements Pte Ltd in 2017, Eurolec
Instrumentation has enjoyed significant investment in equipment, infrastructure and marketing. More than £50,000 was ploughed into the
growth of the temperature and pressure instrumentation manufacturer at the end of last year, which has already produced dividends with an extended distributor network and increased international sales. Eurolec is now represented in more than 20
territories globally and its Republic of Ireland-based lab has been technologically enhanced increasing Eurolec's overall capacity for precision calibration certification and product service requirements.
Managing Director Chris Mears said: "2017 was a very exciting year for Eurolec but it looks like that is going to be
exceeded by further improvements and progress in 2018. "Thanks to the investment and support by Scientific Measurements we have been able to introduce Eurolec's first
five-year warranty which has boosted interest in our portable thermometers and probes, particularly within the highly competitive HACCP and food markets." He added: "We also have new product development well under way, together with further enhancement to our
existing product range across portable thermometers, manometers and temperature calibration sources. "Our established portable thermometer (TH & PC Temp series) and manometer (PR and PC mano series) portables
have already been restyled and have received something of a makeover in advance of new ranges to be announced in the near future. "Investment in new reference instrumentation in Eurolec's calibration laboratory has also resulted in an
improved temperature calibration service from the company with stated uncertainties of measurement now as low as ± 0.03°C." Eurolec is also the official UK & Ireland distributor for the Ono Sokki range of specialised engine tachometers, FFT
analysers, rotary encoders and linear gauges with further announcements due shortly on developments in this promising sector.
Eurolec 0845 370 4321
www.eurolec-instruments.com
38 FEBRUARY 2018 | INSTRUMENTATION Inert Gas Blanketing
Do you use inert gas blanketing within your manufacturing process?
Inert gas blanketing is a process used to protect volatile, combustible or perishable products from undesirable reactions such as oxidation or explosion. The Rapidox 1100 and Rapidox 2100 zirconia oxygen gas analysers can measure oxygen content at the lowest level in parts per million, ensuring that the inert environment is as pure as possible.
There are many benefits in inert gas blanketing such as:
• risk of oxidisation Assists in chemical storage • Protects perishable products • Enhances safety • Reduces contamination • Maintains inert environment • Used in many applications
If you would like further information on Rapidox gas analysers or advice using gas analysis within your process,
Cambridge Sensotec 01480 462142
www.cambridge-sensotec.co.uk
CONNECTINGINDUSTRY.COM/INSTRUMENTATION 01993 706565
www.bartington.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95