CASES & ENCLOSURES FEATURE S
mall drives for machines and equipment are typically powered
up to 9.0A and are protected by conventional motor circuit breakers. However, when space in the enclosure is limited, it is very difficult to find room for significant numbers of protective components. Rittal’s new motor controllers for its
RiLine Compact power distribution system offers a sophisticated solution. To assist engineers, Rittal has also produced a 3D configurator that reduces the time required to generate Compact RiLine busbar systems. Following the successful launch of the busbar system “RiLine Compact” last year, Rittal is now expanding the product range. Until now, the small 125-A-max busbar system consisted entirely of shock-hazard-protected boards, which form the basis of the system, along with assembly components such as connection adapters for busbar infeed and component adapters for the easy set-up of switchgear and protection devices produced by other manufacturers. Rittal will shortly be launching new motor controllers into the range. These can be fitted directly and easily onto the board in a one-step installation, to minimise the time and effort spent on wiring.
A COMPACT SOLUTION FOR SMALL SPACES Rittal offers motor controllers in three staggered current ranges: 8A/2.4A/8A. These combine the functions of direct starter and reversing starter within one single device. Its slimline profile - just 22.5mm wide - is particularly impressive and frees up
around 50 per cent more space compared to the standard 45mm- wide switching device in the range, and as much as 75 per cent more space compared to the 90mm- wide reversing combinations.
HYBRID TECHNOLOGY TO IMPRESS The three-phase motor controller is a high-performance hybrid switching device with a current monitoring function, offering a longer lifespan and low-loss operation. The principle behind it is simple: first, the electronics are switched on using the input signal, and then the mechanical contacts takeover for the duration. The motor controller also provides
diagnostics to detect internal and external errors. The operating statuses and error messages can then be evaluated through the four different illuminated LEDs.
ASSISTANCE FROM A 3D CONFIGURATOR To assist engineers, Rittal has also produced a 3D configurator that reduces the time required to generate Compact RiLine busbar systems. A series of easy to follow steps produces detailed drawings, the ability to select component adaptors, and a bill of materials. Find out more at
https://www.rittal.com/com_en/riline/k onfigurator/#/6. Further information about Rittal’s
diverse portfolio of products is available at
www.rittal.co.uk and
www.friedhelm-
loh-group.com or on twitter @rittal_ltd.
Rittal
www.rittal.co.uk
RITTAL’S PERFOREX TAKES CENTRE STAGE AT MANUFACTURING FACILITY UNVEILING
LCA Group is looking ahead to a sparkling future after the Welsh Government’s cabinet secretary for the economy Ken Skates joined staff and management to open its new state-of-the- art manufacturing facility in North Wales. Mr Skates cut the ribbon at the new building on the
Hawarden Industrial Park. LCA managing director Alan Sheppard and David Williams, who chairs the LCA Group board, spoke about the firm’s future and its commitment to North Wales business at the event, which was also attended by Alyn and Deeside MP Mark Tami as well as regional business leaders. The launch event was rounded off with the chance for the
invited guests to view LCA’s new £500,000 ‘UK first’ 3D laser machining centre from Rittal. The investment in the new Rittal Automation Systems 3D
laser machining centre – the only one of its type in the UK – will enable LCA Group to dramatically boost production of its leading stainless steel control panels. Traditionally made by hand by experienced electrical
engineers, the manufacture of LCA’s leading control panels is essential in a range of industries including nuclear, food manufacturing, power generation, water and utilities, oil and gas and pharmaceutical. The new facility is based on the site of the former
Davies Bakery, just a stone’s throw from Airbus and Hawarden Airport, where more than 230 Lancaster bombers and 5,500 Wellingtons were built during WW2. In tribute to the famous aircraft, the new building will be named Gibson House, after Guy Gibson who famously led the 1943 Dambusters raid. The investment in the new building and Rittal 3D laser
machining centre will mean LCA Group can deliver more control panels, faster, better, more efficiently for customers across the world. It will also be able to service higher volume orders, or rapid turnaround of bulk orders.
IT INFRASTRUCTURE
SOFTWARE & SERVICES
INSTRUMENTATION | FEBRUARY 2018
www.rittal.co.uk
11
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95
