Editor’s choice
Be safe this summer Factory shutdown contractor compliance
The summer season is upon us, and no doubt you will be looking forward to a well-deserved holiday. But the factory shutdown period also entails contractor management, a traditional nightmare area for health and safety managers. You do not want to go away with that niggling feeling that things are not quite in place so read Make Business’ introduction to contractor compliance
M
ost manufacturers rely heavily on contractors during their factory shutdown for maintenance. But it is
exactly the areas of maintenance and contractors that pose the most significant risk to UK manufacturing. Therefore it is vital for health and safety managers to have the right procedures, safety monitoring and processes in place to allow contractors to work safely and productively. Prosecution under section 3 of HASAWA -
specifically aimed at the management of contractors - is increasingly common. Moreover, with CDM15 guidelines well and truly in place, prosecution is more likely and more costly than ever before. Fines for health and safety offences have more than tripled since CMD15 was implemented. In 2017/18 the largest fine was £3 million in comparison to 2014/15, when it was £750,000 Apart from prosecution and fines, in
the worst-case scenario contractor mismanagement can lead to tragic accidents and lost lives. In 2010 two workers at the Sonae industrial plant in Knowsley were killed whilst carrying out maintenance work. An investigation by the HSE (Health & Safety Executive) found, amongst other findings, that Sanoe did not have
10
a process in place for managing contractors. It is impor tant to be aware that these days
CDM15 does not only apply to traditional construction work, but also to decorating, repairs, and even cleaning with a high-pressure hose and the installation of phones and computers. You will need to adhere to the CDM15 requirements to safely manage non- employees carrying out work for you. But do not fret, the requirements are relatively straightforward: If you are employing more than one contracting firm to under take ‘construction’
1
work for you, then you must put one of them in charge of the job or take it on yourself (the person in charge is known as the Principal Contractor). If your project lasts more than 30 days with 20 or more workers employed on any one
2
day, you must notify the HSE. So, is a Risk Assessment and SSOW (Safe
Systems Of Work) enough to manage a contractor painting your factory wall outside from a scaffold? You will be glad to know that the answer is yes, as long as the assessment is suitable and the paperwork is sufficient. With CDM15 in mind, it is advisable to
revisit the HS (G) 159 document on managing
contractors, which still provides a good framework for companies to work to. Are you compliant in each step of the process: planning; choosing the contractor ; contractors working on site; keeping a check and reviewing the work? If other people in your company are tasked with managing contractors, it is vital for them to understand the risks and liabilities they are taking on. They might very well benefit from a training course on the subject. Ultimately, with the right processes,
procedures and safety measures in place, accidents and prosecution can be avoided. Remember to keep it simple, carry out all the steps and always check that your contractor is doing what they say they are. Want to know more to make sure you are
fully compliant? Make Business subscription services offer unlimited telephone advice, online resources and exper t face-to-face suppor t by its team of Health, Safety and Sustainability consultants. Make Business is par t of Make UK, the UK manufacturing body.
Make UK
www.makeuk.org/Services/health-safety- sustainability
August 2019 Instrumentation Monthly
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82
