INFOMERCIAL IPAC
Improving Lubrication in Construction and Mining Equipment
Jeffrey A. Crow, Ph.D., Len Badal, IPAC, Inc.
fluids service some of the biggest and heaviest off-road equipment in use, such as mining dump-trucks, and the demands placed on their final drives.
I In another
point of view, such a belief is not com- pletely surprising since Caterpillar recom- mended TO-4 for years, particularly as it related to proper frictional properties and to minimize the number of fluids required for equipment. Even before this, engine oil was used for a wide range of applications beyond engines. As targets for efficiency, productiv-
ity, and sustainability have increased for mining and construction companies, the equipment that supports their businesses has become more complex requiring high performance lubrication from multiple fluids to ensure all components are op- erating efficiently. Previous approaches using a “one-for-all” lubricant for these offroad applications is no longer sufficient. Today’s large haul trucks have separate compartments and mechanical drives for wet brakes, and when the choice for lubri- cating this compartment is a 10W fluid, a separate fluid that can handle high loads on bearings and drive gears is more im- portant than ever. The combination of higher temperatures and these higher loads creates an immense amount of strain on the axles, differentials, and final drives. So today, it is highly recommend- ed to use a special fluid for these highly loaded compartments, and that fluid is one that conforms to the Caterpillar FD-1 specification. This is a specification de- veloped by Caterpillar to better define the performance needed in these cases. Fluids that are suitable for an FD-1 type
performance will have numerous im- proved attributes that will lead to a longer life of these highly loaded components. In the most simplistic sense, allowing for a much higher viscosity goes a long way, and FD-1 fluids are typically SAE 60
36
t may sound surprising, but some in the lubricant industry still believe a Caterpillar® TO-4 oil in final drives is perfectly fine. It is surprising par- ticularly when one considers these
weights.
Optimization of viscosity alone
accounts for significant improvement in micropitting performance. Using a prop- erly formulated FD-1 fluid in the rear dif- ferentials on mining haul truck vehicles helps reduce micropitting in the gears and provides longer equipment life, re- duced downtime, and directionally lower operating cost per ton for the site when compared to using TO-4 lubricant tech- nology.
In addition to the fluid having the proper
viscosity, utilizing a high-performance quality package like International Petrole- um Products & Additives Company (IPAC) 9188, designed specifically for where FD-1 fluids are indicated, provides optimized additive technology that delivers protec- tion for these highly loaded final drives and axles. This package ensures the fluid will protect against wear, scuffing, thermal and oxidation degradation, all the while maintaining elastomer compatibility. This package is designed for final drives that do not contain friction material. Friction is optimized specifically for final drives, to protect against micropitting and other modes of fatigue and failure.
It is noteworthy that it is not advisable to use FD-1 fluids where it is not indicated, particularly for wet brake applications, as the fluid is not designed for those appli- cations. Some equipment and wet brake applications require an unusually high level of friction for optimal brake torque
capacity, and this may not be provided by an FD-1 fluid. Key areas where FD-1 fluids formulated
with IPAC 9188 excel over TO-4 fluids in- clude scuffing and micropitting protection, along with bearing protection and corro- sion, oxidation, and thermal stability in the finished fluid. Furthermore, roller bearing protection across a broad range of lubri- cation regimes is ensured when the fluid is optimized. Bearings often encounter a wide range of conditions because the ratio of oil thickness to surface rough- ness spans the hydrodynamic, mixed and boundary lubrication conditions.
With
elastohydrodynamic (EHD) conditions that fall between hydrodynamic and mixed zones being predominant as well, lubri- cant formulators can ensure proper lubri- cation is maintained with FD-1 fluids. The cleanliness imparted to gear surfaces is another key enhancement. IPAC is dedicated to developing the next
generation of additives and fluids for the construction and mining markets. These are key segments in the global economy and IPAC is focused on providing high quality, technologically advanced ad- ditives to ensure superb reliability and operating performance.
The chemistry
IPAC delivers to the market is designed to improve efficiency, provide longer fluid life, and reduce wear to protect equip- ment for longer service. Visit IPAC today at
www.ipac-inc.com.
LUBEZINE LUBEZINE MAGAZINE GAZINE | SEP| SEPTEMBER 2023
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40
