| Power plant products Socomec energy storage unveiled
Socomec has unveiled a new compact model of its Sunsys HES L energy storage system, designated Sunsys HES L Skid. The new design is said to improve overall efficiency, reducing installation, transport, and maintenance time for users. The upgrade
should enable faster deployment of European electric vehicle charging infrastructure (EVCI), power infrastructure for commercial and industrial buildings, and microgrids. It comes as Europe’s energy transition accelerates, where energy storage systems play a crucial role in ensuring grid stability and reliability as the uptake of renewable energy sources increases. According to the International Energy Agency, global annual energy storage additions must pick up significantly, to an average of near 120 GW per year over the period 2023-2030, to stay on track with the Net Zero Scenario. Socomec’s new design allows for the connection of up to six battery cabinets per system for on-grid and off-grid applications. All cabinets within the energy storage system are shipped assembled, mounted and
internally cabled on an adapted skid. This guarantees minimum installation time, and limits investment in civil works, and promotes optimum quality. Once on-site, the project owner merely has to connect the AC power and communication cables. The upgraded design also means the system is easily transportable and deployable, allowing for it to be installed on alternative sites. Elodie Hestin, Energy Storage Solutions Specialist, Socomec, said:
“Speaking to our customers, we know the red tape and logistical challenges they face to deploy the storage they need. That’s why our innovation engineers have redesigned our storage solution to solve these challenges – minimising installation time, increasing flexibility, and lowering overall transport costs.”
Test bench for grid compliance testing
The Nordex Group has created a new power hardware-in-the-loop (PHIL) test bench for comprehensive grid compliance testing of power electric drivetrains. The test bench includes a grid emulator, allowing Nordex to simulate a wide range of grid conditions, including voltage and frequency variations, power fluctuations, weak grid conditions, and grid faults, without needing field testing.
As renewable energy penetration increases, grid codes with different requirements are established worldwide, and requirements are becoming stricter. Additionally, weakened grids and possible future off-grid scenarios for hydrogen production add to the complexity of grid integration.
The test bench has been developed and
engineered by R&D Test Systems. It will be equipped with advanced measurement and control systems that allow for real-time monitoring and emulation of power grid behaviour, and will be delivered to Nordex during 2024.
It complies with the new Technical Specification IEC 61400-21-4 for test bench- based compliance testing. The platform will also allow Nordex to test a wide range of electrical drive train variants for wind turbines, and other grid loads such as batteries or electrolysers.
The test bench will be able to emulate under voltage ride through, over voltage ride through, different fault types (symmetrical or non-symmetrical), grid impedance, harmonic injection, voltage jumps, and phase jumps.
Largest single order for electrolyser in the MW range
Enapter AG has received new orders for its megawatt-class electrolyser, including its largest single order from Europe to date for an electrolyser in the megawatt range. Owing to their multicore technology, these AEM units are well–suited to the efficient production of green hydrogen from renewable energy sources on an industrial scale. And as they do not use iridium, they incorporate a degree of future proofing. Enapter has contracted to supply three multicore-class units, each of 1 MW, to the
logistics company CFFT SpA. Among other things, the company operates a harbour near Rome. There, the Enapter electrolysers will be used in a hydrogen refuelling system and operated with sustainably generated electricity. The order from CFFT is the largest single order from Europe in Enapter’s history to date.
In addition, Italian company F.i.l.m.s SpA has ordered a 1MW electrolyser in the multicore-class. This metalworking company in the OMCD Group specialises
in hard metal parts and uses commercially available hydrogen supplies in its production processes. With the Enapter machine, the company will be able to produce green hydrogen from renewable energy and feed it directly into its gas mix for the furnaces. F.i.l.m.s’ medium-term goal is to gradually replace natural gas and switch to green hydrogen as completely as possible. The two contracts concluded in Italy have an order volume in the upper seven-figure euro range.
www.modernpowersystems.com | April 2024 | 35 Compact version of
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43