Tools for working with wax Professional Wax Ring Stick
Designed to accurately resize the inside diameter of wax ring models to the required finger size.
• made from a lightweight black plastic • Tapered section of this useful tool features a steel blade edge to enable easy sizing of a wax model before casting • marked with equidistant lines, each symbolising a British finger size, indicated by a letter (a-Z) or a number (Z+1 - Z+6) • To use, slide the wax model onto the stick and gently rotate it to remove excess wax until you achieve the desired finger size • The end results may vary depending on the material, method and casting used
999 BAGP PRiCe/£: 13.50 ON THE BENCH Cuttlefish - Large
Soft bone of the cuttlefish - variable in size due to nature! 998 083
PRiCe/£: 2.95
Cuttlefish bones are used for a technique of casting where either two bones or two halves of a bone are sanded to give flat sides. a model is pressed into one flat side together with 3 or 4 locating pegs. The other bone (flat side down) is then pushed onto the model. The two halves are separated and the model removed. vents are scored (allows air to escape) between the model and outside edge of bone. a funneled hole is also cut (allows the molten metal to be poured into the cavity). The two halves are bound together with binding wire. molten metal is then poured into the hole and left to solidify. The mould is separated and the casting removed and allowed to cool.
A.Wax Heat Pen With 1 tip. Takes one aa Battery.
B. Set of 3 Pen Tips 999 BAH
998 442 PRiCe/£: 19.99 “” PRiCe/£: 15.20 A. C.Wax Detailer, Set of 2
This set of two wax detailers are perfect for precision carving and achieving detail in your waxes. The tips are flexible meaning those hard to reach places are no more.
999 AZV2 PRiCe/£: 9.20 D.Wax Saw Blades
Bundle of 1 dozen. These saw blades are designed for wax cutting. The blade has every other tooth missing, which means smoother cutting and a ‘non-loading’ action.
