Tools Metal ForMiNg toolS Durston Jump Ring Maker Pro II
Make your own perfectly crafted jump rings with this professional Jump ring Maker from Durston! exclusive to cooksongold. ideal for making large batches of jump rings in one of 20 different sizes, from almost any kind of wire, to a precision finish ready to solder. Features:
• a coil winding jig for forming, along with a cutter and handpiece cover which are fully compatible with the Dremel Fortiflex large Handpiece (999 3302) for cutting your jump rings! • each mandrel is 12cm long • Sizes included are: 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5 and 12mm • Maximum wire thickness for inserting into mandrel hole is approximately 1.85mm • Supplied in a sturdy, powder coated aluminium base which should be screwed to a work surface before use • Full instructions are provided
999 7164 Price/£: 195.00
Durston Circular Saw Blade for Jump Ring Maker Pro II
999 7163 ON THE BENCH
Simply select one of the 20 mandrels from 2.5 - 12mm and insert into the coil holder and you are ready to start producing your own jump rings. insert one end of your chosen wire into the hole in the mandrel and fold over so that it does not come loose. then, rotate the handle of the coil holder while using your other hand to feed the wire onto the mandrel to create a tight, even coil. Using snips, cut the coil loose from the mandrel before screwing into the spring-loaded cutting base. Finally, attach the cutting blade and handpiece cover to your Dremel Fortiflex large Handpiece to evenly cut through your jump rings. once cut, unscrew the coil holder to remove the finished jump rings.