Technical Sessions by Tracks
Track 1 Session 8 | Shell Systems | 14:00 - 15:00 PM • A
fundamental analysis into the temperature of
investment casting slurries: Is it important and how can it affect my process?
Speaker: Dr. Gavin Dooley (Remet) Abstract: Investigation into the effect of slurry temperature on shell system performance.
• A novel engineered Investment Casting binder & its use in advanced casting applications
Speakers: George Cameron & David Scott (Nalco) Abstract: New binder systems to support faster cycle times, uniform shell builds, and material compatibility.
Track 2 AMIC SEMINAR S2 | 14:00 - 15:00 PM
• ML Prediction of Surface Roughness in 3D-Printed Shells ENEW wax reclaim technology
Speaker: Wenchao Tang (Access) Abstract: Using machine learning to predict surface finish outcomes based on printing orientation and angles.
• AI and Full Automation in Additive Manufacturing Speaker: Richard Gaignon (3D Ceram) Abstract: Combining AI and automation to optimize workflow, decision-making, and production scalability.
Exhibition Time
15:00 - 15:30 — Exhibition Coffee Break & Exhibition time. Technical Sessions by Tracks
Track 1 Session 9 | Sustainable Casting | 15:30 - 17:00 P
• Microporosity Prediction in IC Speaker: Sayan Chatterjee (Access) Abstract: AI-supported gating and casting optimization to reduce porosity in critical castings.
16 ❘ April 2025 ®
Full details and registration at
https://eicf2025.org Programme available with further details at the EICF App. EICF reserves the right to alter the programme without prior notice.
• Cost-efficient IC Process Design with Digital Twins Speaker: Dipl.-Ing. Erik Hepp (Magma) Abstract: Using digital twins to balance cost, quality, and sustainability in investment casting.
• Role of HIP in Investment Casting Speaker: Rasmus Björk (Quintus) Abstract: How HIP
treatments significantly
Track 2 AMIC SEMINAR S3 | 15:30 - 17:00 PM
• Silica-Loaded Slurries for DLP Printing Speaker: Vincent Icart (Prodways) Abstract: Optimizing photocurable slurry chemistry for high- performance DLP 3D printed shells.
• Transforming IC with PSLA Technology Speaker: Patrick Dunne (3D Systems) Abstract: Next-gen projector-based SLA platform for fast, precise pattern production.
• 3D-Printed Ceramic Molds for Ni Alloys Speaker: Viral Mistry (Access) Abstract: How lithography-based 3D printed ceramics enhance microstructure and casting performance.
17:00 PM — End of Conference Day 2 End of Conference & Exhibition activities for Day 2.
enhance
mechanical performance of cast parts whilst reducing defective parts.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
