Exhibition Time
12:45 - 14:00 PM — Exhibition Lunch available during the exhibition.
Technical Sessions by Tracks
Track 1 Session 3 | Materials & Process Innovation | 14:00 - 15:00 PM
• Development of High-Performance Aluminum Aerospace Castings
Speaker: Dr. Haize Galarraga (Tecnalia) Abstract: Using ICME methodology for Al-Cu alloy design and validation for aerospace components.
• Improvements in Experimental Filtration Efficiency Analysis in Nickel Superalloy Investment Casting
Speaker: James Simpson (HTRC) Abstract: Efficient, production-integrated methodology for evaluating ceramic filter performance.
Track 2 Session 4 | Circular Economy I | 14:00 - 15:00 PM
• RENEW wax reclaim technology Speaker: Chris Verta (MORSA) Abstract:
Chemical reclaim process
• Casting Wax Supply & Carbon Reduction Speaker: Dr. John Machielse (Paramelt) Abstract: Sourcing alternatives and low-temp waxes to reduce footprint and enhance safety.
16:30 PM — End of Conference Day 1 Wednesday, May 7
09:30 - 10:00 AM — Tritech, Where Vision Meets Precision Tritech Precision Products is the Host Foundry of the Conference. This presentation will cover detailed information on the Tritech Group Speaker: Mr. Steve Goodier (Tritech Group)
10:00 - 10:30 AM — Keynote: How can I make it – Additive manufacture or by casting? Keynote opening the Additive Manufacturing and Investment casting (AMIC) Seminar Speakers: Dr Carl Boettcher & Dr. Owen Draper (Rolls – Royce)
Exhibition Opening
10:30 - 11:45 AM — Exhibition Coffee Break & Exhibition time.
restoring dewax Technical Sessions by Tracks to original spec. Resolves cost and supply issues.
• Dewaxing Process in Autoclave Speaker: Ali Alkin (Akarmak) Abstract: Critical insights on dewaxing cycle parameters, NDT, and vessel safety.
Exhibition Time
15:00 - 15:30 PM — Exhibition Coffee Break & Exhibition time.
Technical Sessions by Tracks
Track 1 Session 5 | Market Review by Regions | 15:30 - 16:30 PM
• Presentations of regional markets: Europe, North America, China, Japan
Speakers: Representatives of EICF, ICI, CICBA & JFS
Track 2 Session 6 | Supply Chain | 15:30 - 16:30 PM
• Resilient Supply Chains in Investment Casting Speaker: Tobias Schmidt (Zircoa) Abstract: Case studies on logistics strategies post-COVID and amidst geopolitical tensions.
Track 1 Session 7 | Circular Economy II | 11:45 - 12:45 PM
• Revert Revolution Speaker: Nicole Procter (ICD Europe) Abstract: Repositioning revert as a strategic raw material for cost savings and sustainability.
• VIM B52 – Superalloy Scrap Recycling Furnace Speaker: Matthias Knabl Abstract: Design and implementation of a remelting furnace for internal revert recycling.
Track 2 AMIC SEMINAR S1 | 11:45 - 12:45 PM
• Investment Casting Meets 3D Printing Speaker: Andrew Graves (Stratasys) Abstract: Combining stereolithography and casting for more flexible, high-quality part production.
• Enhancing Casting Capabilities with PMMA 3D Printing Speaker: Cameron Coyle (Voxeljet) Abstract: Integrating PMMA-based printing to improve quality, complexity, and production efficiency.
Exhibition Time
12:45 - 14:00 PM — Exhibition Lunch available during the exhibition.
April 2025 ❘ 15 ®
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
