LARGE-FORMAT TILES
A BIG IMPACT
BAL delivers a high-performance solution for large-format porcelain tiles in a Birmingham office renovation, eliminating the need for uncoupling mats while reducing installation time, material use and project costs.
A prestigious office renovation in Birmingham has been completed with a full BAL solution – including BAL AF Max anti-fracture tile adhesive to remove the need for an uncoupling system.
Large-format 1500 x 200mm porcelain plank tiles from Tiles UK (Leeds) were installed by Sutton Stone and Ceramics on a 300m² walkway.
The subfloor was a suspended CaberDek type board system, so to ensure structural rigidity, these were over-boarded by the main contractors with 280 sheets of BAL Board 12mm boards glued and screwed to take out any deflection.
The porcelain tiles were installed using BAL AF Max – a high-strength, high-yield S2 anti-fracture tile adhesive.
As an ‘all-in-one’ anti-fracture system, BAL AF Max is an innovative technology designed to absorb the lateral stress from the substrate. This removes the need for expensive traditional technologies such as uncoupling mat systems, saving project costs, reducing labour time through removing the need for cutting and installing the mats and freeing up storage space needed for large rolls of uncoupling mats.
As a high yield product, one 17kg bag can go up to 8.4m² with a 10 x 10mm notched trowel meaning only four bags are needed for 30m², compared to 10-11 bags of adhesive for a
24
traditional ‘tile adhesive – uncoupling mat – tile adhesive’ system install.
Extensive testing has revealed BAL AF Max provides a 40% lower-cost system, 70% faster installation time, and 70% less material weight than traditional uncoupling systems.
On this project 56 bags of AF Max were supplied by Tiles UK, which easily met the meterage required.
After the tiles were installed, they were grouted with BAL Micromax3 ECO water repellent and anti-microbial wall and floor grout in Anthracite, with movement and perimeter joints sealed with colour and texture-matched BAL Micromax Grout-Effect Sealant.
Talking about the project, Garry Hughes from Sutton Stone and Ceramics said: “My team were very impressed with BAL AF Max, especially how nice and light it was in the bucket.
www.tomorrowstileandstone.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36