CLEANING, MAINTENANCE & RESTORATION A SPOT OF BOTHER
Not all orange staining on patios is rust. LTP explains how to distinguish naturally occurring iron breakout from surface rust – and how to treat each effectively.
Iron breakout is a common cause of orange staining on patios and paths, and the resulting marks can be difficult to remove. They’re frequently mistaken for stains caused by rusting or flaking metal objects, such as BBQs, metal umbrella stands and garden furniture. As a result, the affected area is often treated with a standard brick and patio paving cleaner, typically containing acid.
But this is where problems arise. These cleaners won’t remove naturally-occurring rust stains and can actually accelerate orange discolouration in some natural stones. The cause – and therefore the appropriate treatment – is very different.
WHAT CAUSES NATURALLY-OCCURRING RUST STAINS?
Rust or orange-coloured discolouration can appear naturally within iron-rich natural stone pavers – and it’s especially common in sandstone. These stones naturally contain iron which can oxidise or rust when it comes into contact with water and oxygen.
“USING THE WRONG PRODUCT CAN TRIGGER OR WORSEN DISCOLOURATION IN IRON- RICH STONE.”
Staining often appears after laying and is easy to identify. Rather than forming a defined mark, the colour gradually develops across the surface, creating a widespread orange or brown bloom.
WHAT CAUSES RUST SPOTS AND RUST STAINS?
In contrast, surface rust stains from objects often mirror the exact shape and position of the rusting metal that was sitting on the surface. Some weed killers and lawn fertilisers can also create rust stains. This is caused by iron compounds, like ferric sulphate, and these stains typically appear as small spots of rust.
Once you’ve established which type of rust stain you’re dealing with, removal can be swift and effective, provided that you use the correct product.
A CASE IN POINT
We were recently contacted by a customer regarding widespread orange staining on natural grey sandstone. The pavers had a relatively smooth non-slip finish. A hydrochloric-acid based wash had been used to remove dirt and light staining. It was applied following the manufacturer’s instructions. A few days later, widespread orange/brown staining appeared across multiple slabs.
Our Rust Stain Remover was recommended by a local paving supplier. This remover is non-caustic and non-acidic and is particularly suited to natural stone. It is highly effective at removing surface rust stains, but it is not formulated to treat naturally-occurring iron oxidation within the stone.
Before and aſter treatment with LTP Ferrex 20
www.tomorrowstileandstone.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36