CLEANING, MAINTENANCE & RESTORATION
Initially, the treated area looked much better but, after approximately one week, the orange staining gradually reappeared. The treatment was then repeated two weeks later. Once again, the pavers appeared significantly improved immediately after treatment. However, within a few weeks, some of the orange staining had returned.
WHY THE WRONG TREATMENT WON’T WORK
https://www.ltp-online.co.uk/prod/ltp-rust-stain-remover
Rust stain removers – even non-acidic solutions like our own LTP Rust Stain Remover – won’t remove naturally-occurring rust stains. In some cases, treating iron-rich stone with the wrong product can trigger or worsen discolouration by affecting iron compounds naturally present within the stone. This can result in ‘iron break-out’ – a reaction involving the iron within the stone that causes it to oxidise and produce the characteristic orange discolouration.
To treat this type of staining, you need to use LTP Ferrex Iron Stain Remover – a treatment specifically formulated for naturally-occurring iron staining.
https://www.ltp-online.co.uk/prod/ltp-ferrex SO, WHAT’S THE DIFFERENCE BETWEEN THE TREATMENTS?
The chemistry used in our non-acidic Rust Stain Remover helps remove orange staining caused by rusting metal objects on the surface of the stone.
The chemistry used in Ferrex Iron Stain Remover treats the oxidation of naturally occurring iron within the stone, removing the resulting orange discolouration rather than removing the iron itself.
So, for rust on the stone, use LTP Rust Stain Remover and for iron in the stone, use LTP Ferrex Iron Stain Remover.
https://www.ltp-online.co.uk/prod/ltp-rust-stain-remover https://www.ltp-online.co.uk/prod/ltp-ferrex
https://www.youtube.com/c/LTPTV/featured
For more advice and demos, browse LTP TV on YouTube or contact the LTP team direct on tel. 01823 666213 or email
info@ltp-online.co.uk.
www.ltp-online.co.uk
“THE CHEMISTRY USED IN FERREX IRON STAIN REMOVER TREATS
THE OXIDATION OF NATURALLY OCCURRING IRON WITHIN THE STONE.”
Patio aſter cleaning with a hydrochloric-acid based wash.
https://www.ltp-online.co.uk/prod/ltp-ferrex
HOW TO APPLY LTP FERREX IRON STAIN REMOVER • Dampen the surface of the stone with a little water.
• Dilute the cleaner 1:1 with water and spray onto the surface.
• Leave to work for up to five hours. The orange staining should gradually fade and disappear.
• Once it has disappeared, seal the stone with LTP External Stone Sealer to help prevent the orange
staining from returning.
x.com/TomorrowsTS 21
https://www.ltp-online.co.uk/prod/ltp-external-stone-sealer
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36