ADHESIVES & GROUTS HISTORIC PRESERVATION
Mapei tile system joins spec on the conversion of a Grade II listed landmark into Tower Hamlets new Town Hall.
An extensive tiling project has been completed at Tower Hamlets new Town Hall using a Mapei installation system. The project, which included the reception area, washrooms and ‘porte- cochere’ entrance was completed by Stone & Ceramic for Bouygues. Tiles specified included natural stone, brick- slips, porcelain and ceramics.
Located within the former Royal London Hospital building in Whitechapel, which had been vacant since 2013, the new Town Hall project brings the historic Grade II listed landmark building back into the community. Working closely with Tower Hamlets Conservation Officers, Bouygues preserved the integrity of the building and restored many historic features. Inside, the town hall now provides over 1,500
— 30 —
workspaces, meeting rooms and welfare facilities, whilst the entire ground floor is dedicated to public use. The new design was created by Allford Hall Monaghan Morris.
The tile installation, by Stone & Ceramic, included 1200 x 600mm terrazzo tiles, Brick Slips, Portland Stone, 1200 x 600mm porcelain tiles and 150 x 150mm ceramic tiles. To prepare surfaces, two Mapei products were specified: Mapei’s Nivoplan smoothing mortar and fibre-reinforced Ultraplan Renovation Screed 3240 levelling compound. Tiles were installed using three Mapei cementitious adhesives, which each feature a very low VOC formulation; they included Keraquick S1 quick- setting, deformable adhesive, Keraflex
high performance adhesive and Keraflex Maxi S1 – a deformable cementitious adhesive with an extended open time.
Two Mapei grouts were used to install the tiles: Kerapoxy Easy Design, a very low VOC epoxy formulation with improved workability and Zero range Ultracolor Plus grout - Mapei’s anti-efflorescence, quick-setting and drying polymer-modified grout, featuring water-repellent DropEffect and mould-resistant BioBlock and with CO2 emissions entirely offset in the entire life cycle. Mapesil AC highly elastic and mould-resistant acetic silicone sealant was also applied, to create strong seals throughout the washrooms.
www.mapei.co.uk www.tomorrowstileandstone.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42
