PRODUCT FOCUS: PROTECTIVE CLOTHING & WORKWEAR
FINDING YOUR FEET
Simon Ash, HAIX’s UK & Ireland Sales Manager, shares HAIX’s history of supporting workers with dedicated safety boots and the top features workers need today.
Safety footwear was born out of necessity to protect working feet. Long days in all weathers can take their toll, uneven surfaces pose the threat of slips and trips, and the risk of sole penetration from sharp objects can be dangerous. The Health and Safety at Work Act 1974 and Personal Protective Equipment at Work Regulations 1999 require employers to reduce risks at work, and provide protective gear if hazards cannot be reduced or removed.
In any situation where employers identify a risk to an employee’s feet, they must provide the appropriate protective footwear. However, legislative responsibility, the threat of legal repercussions, and care for employees have often resulted in employers focusing on protective qualities at the expense of comfort. For example, footwear with overly rigid, solid materials selected to protect workers from accidents can severely restrict the foot’s natural movement, resulting in excessive pressure and discomfort.
Discomfort, whether from ill-fitting footwear or friction injuries, such as blisters, can lead to changes in natural body posture when standing or walking. When suffering such injuries, wearers tend to limp or stand in an unnatural position to avoid pain or discomfort. This can lead to strain or injury or more serious musculoskeletal disorders if left uncorrected long term.
The HAIX Climber, a staple boot first launched in 2001, has stood the test of time because it makes a major contribution towards ensuring health and safety at work without compromising on comfort. Developed in conjunction with electricity and energy engineers, the safety boot’s highly torsion-resistant sole is particularly suitable for linesmen as it alleviates ‘hot-spots’ and evenly distributes pressure across the whole foot.
Two decades on, HAIX offers a wide range of safety footwear to suit the demands of a diversity of job roles. Boots must protect workers from hazards, be rugged enough for long-term wear in extreme environments, and prioritise ‘health’ as much as ‘safety’. We've identified the five features that are at the top of the list for today's workers.
ALL-DAY COMFORT Safety footwear should support the foot, ankle
and lower limbs. However, a recurring complaint from those who wear safety footwear at work is plantar fasciitis, an acute pain in the heel caused by inflammation, which is prevalent among workers who stand for long periods of time, such as those on the factory line. If left untreated, it can lead to long-term health issues and pain that can
26
influence mental health, work concentration and absenteeism levels.
Selecting safety footwear designed based on biomechanics can address the risk of plantar fasciitis. For example, the HAIX Airpower XR3 has a built-in Arch Support System to help maintain a more natural foot position. This helps reduce wearer fatigue, especially when boots are worn over extended working periods, ensuring better overall posture and acting to minimise long-term injury risk associated with standing at length.
FLEXIBILITY Lower leg fatigue induced by overall boot weight is
another issue that smart material choices can counter. Advances in materials such as nanocarbon can create toe caps and reinforced areas that meet the same safety and protection standards as steel caps but remain ultra-lightweight. Puncture-resistance in boot midsoles is often accomplished using metal, but advanced fabrics and textiles can be used to provide levels of puncture resistance while decreasing overall weight and increasing comfort and flexibility.
FIT AND SUPPORT Any workforce that lifts, carries, bends and crouches
for long periods in one position may be at risk of longer-term issues such as musculoskeletal disorders if their boots do not provide the correct levels of support. HAIX’s designs include PU cushioning systems, two- zone lacing systems, foot arch support and naturally shaped heel counters to ensure that wearers are guaranteed the best fit, regardless of the wear time.
PROTECTION When selecting safety footwear, employers should
conduct a risk assessment to evaluate the level of protection needed for their specific environment. For example, the HAIX Airpower XR26 is designed to protect workers in construction, agriculture, and landscaping. The Airpower XR26’s non-marking outer sole is resistant to heat, oil and gasoline and the boot has a flexible and lightweight steel puncture-resistant midsole for enhanced safety.
DURABILITY Choosing footwear manufactured from high-grade
materials, such as thick waterproof and hydrophobic leather, antistatic non-marking PU rubber, fibre reinforced toe caps and GORE-TEX membranes, will ensure safety footwear can go the distance, even after long periods of wear in extreme environments.
www.haix.co.uk www.tomorrowshs.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68
