ENGINE & TURBINE TECHNOLOGY
BUOYANT BUSINESS
A
Floating wind turbines are a viable alternative to those with fixed anchors, here we explore how they work
Energy providers are
beginning to recognise the vast potential offered by off-shore wind turbines offer otential
O
ffshore wind turbines play a pivotal role in the advancement of renewable energy sources. However,
about 80 percent of global wind resources are situated in waters with a depth of more than 60 meters. These are areas where wind turbines with fixed anchors in the ground face their limits. To harness this vast potential nonetheless, operators are increasingly embracing floating wind turbines.
This trend also impacts material development. In regions with significant water depth, floating wind turbines require buoyancy modules to alleviate stress on high-voltage cables essential for transporting electrical energy. When the water is particularly deep, additional protection against cable damage is provided by rubber blocks inside the buoyancy modules. To ensure that these function reliably over a long service life, Freudenberg Sealing Technologies (FST) has developed a new ethylene-propylene diene monomer (EPDM) material that reliably withstands the high stress. The Weinham based company has
distinguished itself as a long-standing development partner to the oil and gas industry by developing and producing materials that reliably meet the challenges posed by seawater and high pressures, more recently it has begun developing solutions for the offshore wind industry.
Marcel Schreiner. 24
www.engineerlive.com
NEW EPDM MATERIAL The polyurethane buoyancy modules keep the high-voltage cables in a so-
Michael Ruehm.
called “lazy wave”, reducing not only the tension but also stress on the cables to mitigate the risk of damage. Starting at medium water depths (between 20 and 200 meters), the pressure can become so intense that rubber blocks inside the modules are needed to protect the cables from damage. This is always the case in so-called deep water (300 meters or deeper). These rubber blocks also secure the buoyancy module to the cable. It may sound relatively simple at first,
yet it’s anything but trivial. Experience gained in the oil and gas industry shows that the great temperature variations cause pipelines to undergo compression by up to 55 percent of their diameter, followed by expansion. Even if lower compression values can be expected for the differently
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
