SECTION TITLE
INSTRUMENTATION • ELECTRONICS
most applications including medical and automotive devices. Te second way of strengthening the glass is physical tempering, where the glass is slowly heated to around a peak temperature of 700°C and then cooled rapidly by high pressure air. Te outer surface of the glass cools more quickly than the centre, which has the effect of compressing the edges as the centre pulls away from it, increasing the tension of the glass and therefore the toughness. Applications with thicker coverglass benefit from physical tempering such as outdoor entry systems, security communications and public signage systems where vandalism could occur. Tere is a difference in the two toughening methods when the glass is broken, the physically tempered glass breaks into small pieces without sharp corners, while the chemically strengthened glass shatters into sharper fragments, making physically tempered glass safer in that respect. Chemically strengthened glass has the advantage in the respect that it is thinner, stronger, smoother and offers better optical performance than physically toughened glass.
OPTICAL BONDING Te cover lens has to be situated in front of the LCD display. It can be fixed in place with an air gap or be optically bonded to the LCD. While using an air gap is cheaper than optical bonding, it is inferior in almost every other way, especially if the display is to be used outside or in other areas where there is high ambient luminance. Te air gap causes repeat refraction and reflection between the three different components of the display (LCD, air gap, cover lens), meaning that some of the light from the display is reflected back to it, impacting the intensity and clarity of the image. Optical bonding involves filling the air gap with a resin, which bonds the lens and the display together. Tis allows the light to move through unhindered, and as more of the light from the display reaches the surface of the cover lens, the image is clearer and brighter. A second benefit is that optical bonding also allows external light to pass with very little being directly reflected and thus “absorbed” in the display cavity. Optical bonding also helps in other areas. Te resin can absorb shock to make the display module more rugged, and it provides a barrier that stops dust and water from penetrating between the cover lens
16
www.engineerlive.com
How optical bonding affects light
and the display. It also stops condensation forming in the gap between the two.
ANTI-GLARE COATING While optical bonding assists in the reduction of glare from the screen, it is also possible to use additional coatings to further reduce screen glare. Te anti-glare coating gives the surface of the screen a matt effect that can diffuse light in multiple directions instead of directly reflecting it. However, the coating may also have an effect on the image being displayed as the light from that can be diffused at the same time. An excess of anti-glare coating will have a small impact on the contrast and vibrancy of the image, making it appear slightly dull. Te anti-glare coating can be applied by either surface spray treatment or surface chemical liquid treatment.
ANTI-REFLECTIVE COATINGS Anti-reflective coatings are another solution to stop light from external sources being reflected off the screen, which can make the display more difficult to see clearly. Tis technique works in a different way to anti-glare coatings. Anti-reflective coated glass uses the principle of optical thin film interference. Multiple layers of nano-optical materials are coated on to the cover lens surface by vacuum reactive sputtering, improving the transmittance of the glass and reducing surface reflectivity. Ordinary glass has a transmittance of 90% and a reflectivity of 8%. Anti-reflective coating boosts the transmittance up to 99%, so only 1% of the light is reflected. As well as cutting down the amount of light reflected, anti-reflective coating also stops effects
such as ghosting and the whitening of the screen which happens when the screen is exposed to strong external light over a period of time. Minimising reflection is also important to users as it reduces the fatigue that is caused by light reflection on the eyes.
OTHER TREATMENTS As well as the treatments mentioned above, other methods can be used to provide different benefits to LCD displays. For example, A layer of nano-chemical material can be coated onto the surface of the glass to minimise its surface tension. Tis coating reduces the contact area between dust and the glass surface by 90%, making the glass hydrophobic, oil-resistant, and fingerprint-resistant, while keeping the screen clear and readable for a longer period of time. Alternatively, an optical film (O-film) polariser can help to make the display more readable from viewing angles that are not directly in front of the screen. Each application has its own
requirements from an LCD screen. Tese requirements could depend on the environment where the display will be situated, the user’s reading position or how durable the display has to be. Choosing the correct cover lens and treatments make it possible to tailor the display to the exact needs of each application and get the best possible optical performance out of every LCD display.
Alexander Pang is applications and development engineer at Anders.
www.anders.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
