ADDITIVE MANUFACTURINGSECTION TITLE
Lockheed Martin engineers are testing a multitude of applications designed for the lunar rover. Christian and his teammates are using Method X to print a number of parts for prototyping and proof of concept for the rover project, including embedded systems housing, sensor mounts, and other custom parts. “Te printer produces dimensionally tolerant parts right out of the box – and for all sorts of projects, you can print multiple parts that can mate together.” Many of these parts are printed in
MakerBot ABS and designed to withstand desert heat, UV exposure, moisture and other environmental conditions. In combination with Stratasys SR-30 soluble supports, parts printed with MakerBot ABS are designed to provide a smoother surface finish compared to breakaway supports. Printing with dissolvable supports also enables more organic shapes that would have been otherwise impossible to produce through traditional machining. 3D printing encourages engineers to think more outside of the box than they have ever before. “We’re in the very early stages of
3D printing enables a rapid tand affordable testing process
3D printing is one of those strategies that is enabling it.
ADDITIVE MANUFACTURING IN SPACE
Te latest addition to the ATC’s 3D printing lab is the MakerBot Method X 3D printing platform. With Method X, the team can print parts in materials such as nylon carbon fibre and ABS, giving them the performance they need for accurate testing – and thanks to the platform’s heated chamber, the parts are dimensionally accurate without the variable warping that comes with a typical desktop 3D printer. “At ATC, we have multiple MakerBot printers that help with quick turnaround times,” explains Aaron Christian, senior mechanical engineer, Lockheed Martin Space. “I will design a part, print it and have it in my hand hours later. Tis allows me to quickly test the 3D-printed part, identify weak points, adjust the model, send it back to print overnight, and then have the next iteration in the morning. 3D printing lets me do fast and iterative design, reducing wait times for a part from weeks to hours.”
development and the rover we have at ATC is a testbed that we designed and developed in-house. Tis affordable modular testbed allows us to make quick changes using 3D printing to change the design for other applications, whether it be military, search and rescue, nuclear applications and just extreme environment autonomy needs,” says Christian.
3D printing lets the team test parts
affordably, iteratively and modularly. One of the parts printed for the rover was a mount for a lidar, a sensor that can help determine the proximity of objects around it. Broadly used in self-driving vehicles, Lockheed Martin uses lidar in a lot of its autonomy projects. Te mount was designed to sit on the rover, a completely modular robot system, so it was printed in ABS, which allows it to handle more extreme conditions than typical PLA. Te mount also allows engineers to continuously swap out the lidar with different sensors, such as a stereo camera, direction antenna, RGB camera or a rangefinder. It has a complex organic shape to it, which can be difficult to achieve via traditional machining. Te mount also has a lot of access to ensure proper airflow to keep the part cool and temperature- regulated on the robots. Te imbedded electronics housing is designed to go inside the rover or in
other robots at the ATC. Te housing was developed to protect the electronics from anything that could potentially fall on them. Although it was printed in PLA, due to its hexagonal shape, it offers solid strength. Its design also lends itself well to the open airflow needed to cool down the system while still protecting the device. In addition to printing prototypes, Lockheed Martin is using 3D printing for production parts that will go into various space-going platforms. “A big advantage for testing and flying 3D-printed parts for space applications is that it simplifies the design. You can create more complex shapes. It reduces the amount of fasteners needed and part count, which is a huge cost savings because that’s one less part that has to be tested or assembled,” notes Christian. “Tis also opens up for future in- situ assembly in space. You have designed, printed and tested the part on Earth. Now you know that, in the future, you can 3D print that same part in space because you have shown that the material and part works there.” Manufacturing in space is expensive but appealing for future applications and missions. Now, bulk materials can be flown into space to be used to 3D print multiple parts and structures, rather than flying each part out individually. Combining that with a digital inventory of part files, 3D printing in space reduces costs by cutting out the need for storage and multiple trips, which make it expensive to fly. “Te digital inventory concept helps push our digital transformation forward – you have digital designs that you can ship up, where you just print the parts and have them assembled on location,” Christian adds.
A 3D-printed lidar sensor mount that was produced for the space project
www.engineerlive.com 13
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
