36 Air Monitoring


New generation of chemiluminescense based nitrogen oxides-(NOx)-analysers


ECO PHYSIC’S neoCLD-series is ideal for many industry sectors such as the environmental, emission and process, automotive, semiconductor and medical markets. The wide application range, versatility, cost effectivity and accurate measurement capability down to ppt-level are the neoCLD’s greatest strengths. Additionally, neoCLD-series follows the standard reference method for NOx- determination (MCERT, QUAL1). Intuitive user-friendly operation, internal data logging and multiple communication features (LAN, WIFI, RS-232, USB, Bluetooth, HDMI, analogue I/O) guarantee maximum applicability. The neoCLD- series features a graphical user interface, which also offers a remote operation and performance check of the system. A surveillance screen gives operators a live feed on the performance of every component, which enables any engineer to reduce his or her time expenditure to a minimum. The graphical user interface can also be cloned to an external PC and users can operate the instrument as if it was right in front of them.


More information online: ilmt.co/PL/ZWkX For More Info, email:


email: For More Info, email: email:


Standalone warning system reduces risks


of lightning hazards Lightning strikes the ground in the UK around 300,000 times a year, putting at risk those who are often outdoors in exposed, unsheltered locations.


50058pr@reply-direct.com TSI Introduces SidePak AM520i Personal Aerosol Monitor


The New SidePak AM520i Personal Exposure Monitor provides real-time monitoring of respirable dust exposure, and has now received intrinsically safe IECEx certifications for use in potentially explosive or volatile environments.


The SidePak AM520i is the industry’s smallest and lightest personal exposure monitor on the global market with a certified intrinsically safe design. The SidePak AM520i Monitor provides real-time monitoring of respirable dust exposure in the worker’s breathing zone.


Measuring PM10, PM4 (respirable), PM2.5, PM1 and 0.8µm for diesel particulate matter (DPM) exposures, the product combines TSI’s proven direct reading measurement technology, portability, data-logging, and long-running batteries with global certifications for use in environments requiring intrinsically safe instrumentation.


While gravimetric sampling is often a requirement to achieve compliance, it only provides a single data point, an average of exposure for an entire shift. With direct reading capabilities, the SidePak AM520i provides an entire exposure picture, capturing minute-by-minute data for review and analysis to ensure you are on the right path toward both regulatory compliance and worker safety.


The SidePak AM520i’s TrakPro™ 5.0 software allows you to download logged data and quickly analyze findings. This allows industrial hygienists to identify source problems and take corrective action in shorter time, improving safety and clearing regulatory hurdles.


More information online: ilmt.co/PL/QG1n For More Info, email:


email: For More Info, email: email:


48785pr@reply-direct.com


REAL-TIME AEROSOL MONITORING ANYWHERE FOR WORKER SAFETY EVERYWHERE


Although there is no full-proof protection from lightning, measures can be taken to reduce the risk of getting struck. With this in mind, meteorological equipment specialist Biral is offering its BTD-200 self-contained, standalone lightning warning system so that employers can take precautions to prevent exposure to lightning and ensure their workers’ safety.


Statistics show that 30-60 people are struck by lightning each year in the UK and on average, three (5-10%) of these strikes are fatal. Because of this, workplaces have a duty of care to ensure the health, safety and welfare of their workers under the Health and Safety at Work Act 1974, so if staff are working outdoors in exposed areas a lightning safety plan should be in place. Many victims of lightning strikes are struck because they do not behave correctly during a storm, or do not have sufficient warning to get to a safe place. Workers should not begin any task they cannot quickly stop when signs of bad of weather are approaching and must follow a lightning safety protocol to vacate open spaces quickly.


The only reliable and consistent way of issuing a lightning warning is with a dedicated lightning detection system. About 90% of thunderstorms are already producing lightning by the time they are within 12 miles (20 km), so a professional, real-time lightning warning system should provide adequate notice of an approaching storm. However, in the case of the remaining 10%, the first flash will occur nearby or overhead – which is the most dangerous. Therefore, it is important not to rely on systems which only detect lightning as it occurs, as these cannot provide any advanced warning of the threat of overhead lightning and its implicit danger. Ideally, what is required is a reliable thunderstorm detecting system which gives adequate warning time to prepare before the storm moves overhead and one which is also able to warn of the threat posed by potential overhead lighting before it has begun, if the thunderstorm is developing overhead.


TSI, a world leader in particle instrumentation, offers real-time measurement instruments from Personal Exposure Monitoring to Outdoor Dust Monitoring for conducting continuous, real-time dust monitoring. Access data anytime, anywhere.


VISIT TSI.COM NOW


For the best chance of getting a thunderstorm threat warning, the detector should be able to alert for both distant lightning and the presence of a strong electric field at a location. This strong electric field is indicative of a lightning threat developing overhead – so potentially a very serious situation and one to take immediate action over. The innovative BTD-200 lightning warning system from Biral is able to do both. It detects distant lightning up to 22 miles away as well as warning about a developing strong electric field overhead, even if there is no lightning being produced. The Lightning Works software will then alert the staff and managers to these threats in real time, allowing them to review and manage the situation and to staff to the potential danger. It can also activate warning sounders automatically if required. The BTD-200 lightning warning system represents the next generation of lightning detection and warning system. It has been developed from proven professional technology currently used worldwide at airports and by national meteorological organisations.


TEL: +65 6595 6388 EMAIL: AP_MARKETING@TSI.COM WEB: TSI.COM


More information online: ilmt.co/PL/6VeQ 50353pr@reply-direct.com


For More Info, email: email:


AET October / November 2019 www.envirotech-online.com


For More Info, email: email:


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44