26 Water / Wastewater New open channel or partially filled pipe flow meter


measures velocity and level to calculate flow Micronics’ UF AV5500 is a great value, easy to use, area-velocity flow meter for open channels, partially full pipes and surcharged pipes without a flume or weir. And an ideal solution for wastewater, storm-water, effluent, industrial wastewater and irrigation water applications.


The Micronics UF AV5500 uses a submerged ultrasonic sensor to continuously measure both velocity and level in the channel. The sensor resists fouling, corrosion and abrasion and the meter can be configured with the standard submerged velocity-level sensor, or with submerged velocity plus a separate non-contacting ultrasonic level sensor, for highly aerated fluids or those with a high concentration of suspended solids.


The ultrasonic sensor mounts inside the pipe or on the bottom of a channel with a stainless steel mounting bracket (included) and a single screw. No special compounds, tools or hardware are required. And the sensor is completely sealed with no orifices or ports.


It can be configured to measure flow in pipes and channels of any shape, ideal where flumes or weirs are difficult to install and works with water level from 25.4 mm (1”) to 4.5 m (15 ft.).


A new integral 26 million point data logger is now a standard feature and the meter now supports industrial automation protocols: Modbus RTU via RS485 or HART (field selectable).


More information online: ilmt.co/PL/VWKx For More Info, email:


email: For More Info, email: email:


50288pr@reply-direct.com Measurement and documentation


of water quality simplified Systronik’s new CAPBs® sens WQ 10 measuring device kit can be used to check water quality, assess water supply installations and check heating systems for corrosion damage. The WQ 10 sensor module makes it possible to determine temperature, electrical conductivity, permissible overall hardness (sum total of alkaline earth metals) of filling water and the requisite heating water pH setting. This makes it possible to test, safeguard and document the quality of the water on site at any time in order to prevent damage caused by corrosion and limescale during set-up, operation and maintenance. The TDS value (sum total of dissolved substances in water) and the salt content can factored in to the measurements. Thanks to the automatic temperature compensation and measuring range changeover, the sensor offers a high degree of measuring accuracy.


The measurement data is transmitted to the EuroSoft® live app on smartphones or tablets using Bluetooth and displayed in real time. PDF measuring reports together with the date and time can be produced directly from the measurements. These can be stored on iOS and Android terminal devices and transmitted. Additional information such as the customer name or even your own signature can also be added to the measurements. This provides maximum protection in the event of damage.


More information online: ilmt.co/PL/kRXj For More Info, email:


parameter water quality instrumentation range The new AquaSonde range from Aquaread brings built in data logging capabilities to our range of reliable multiparameter water quality testing probes. The AquaSondes are powered by internal lithium batteries to extend the duration of your deployments for as long as 180 days, model and logging rate dependent. All AquaSondes feature an internal memory that is capable of storing up to 150,000 full data sets, that equates to over 3 years continuous data logging.


email: For More Info, email: email:


These logging devices can be deployed on their own for a discrete deployment or they can be deployed with a vented cable allowing for barometric compensation of measurements, specifically depth and % saturation of dissolved oxygen. Each AquaSonde is supplied with a QuickDeploy Key, used to initiate the probe’s logging regime and SondeLink PC software for complete logger set up, sensor calibration


and data collection.


The Aquasonds feature Programmable logging, event and cleaning rates. The Fastest logging rate is 0.5Hz and slowest logging rate is 120 hours. Event testing and logging is possible on any single parameter programmable between 1 minute and 99 hours. Programmable cleaning rate is available when using the AP-7000 with its built in self cleaning system.


SondeLink is the free PC application used with all Aquasonds to provide the following features via an integrated USB interface:


Live data viewing, live data logging directly to PC, full calibration with calibration report generation, retrieval of logged data, logged data output to spreadsheet and text files, full setup utility and site name and GPS geotagging.


Each AquaSonde is supplied with a Quick Deploy Key. When fitted to the AquaSonde, this unique device performs the following tasks: seals the connector, automatically starts the pre-programmed logging regime, provides instant visual indication of AquaSonde health, battery and memory condition.


This allows all programming of the AquaSonde to be performed at your office using the PC application and the logging regime to be started at the precise time of deployment. It also provides peace of mind that the AquaSonde is operating correctly at the time of deployment.


All models feature an internal barometric pressure sensor that is used when calculating Depth and percentage saturation of Dissolved Oxygen. If the AquaSonde is to be deployed for more than a day at a time and accurate Depth and %DO values are required, a vented cable is recommended. For profiling, dip testing or short-term deployment during which time the change in barometric pressure will be negligible, a vented cable is not necessary.


If a vented cable is to be used with the Aquasond then a special Data Hub is required. This option is a termination device for the vented cable that allows a desiccant bottle to be attached and provides a USB port for data retrieval and a visual indication of AquaSonde health, battery and memory condition.


By attaching a PC running SondeLink to the USB port, direct access can be gained to the AquaSonde allowing live data viewing, live data logging directly to PC, retrieval of logged data and full setup, all whilst the AquaSonde is submerged.


Finally there will soon be options for Bluetooth connectivity for use with mobile apps. Embedded site data and GPS geotagging via the app.


More information online: ilmt.co/PL/d0zq For More Info, email:


AET October / November 2019 www.envirotech-online.com


email: For More Info, email:


48814pr@reply-direct.com 50347pr@reply-direct.com Built-in data logging for popular range of multi-


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44