THE NEXT ERA of Flash Point Testing
ASTM D7094 fl ash point testing is the future-proof replacement for ASTM D93 Pensky-Martens testers, bringing 100% safety, unrivaled speed as well as best-in-class precision to your laboratory. With the wide temperature range of -40 °C to 420 °C all kinds of liquids can be tested using only 1 mL or 2 mL of sample. Take a glance at our unique fl ash point testing solutions and our method comparison.
erafl ash X
erafl ash / erafl ash LT A fl ash point testing solution for every application
eralytics THE NEXT ERA fl ash point testers are known for their safe, fast and precise measurements and provide a fl ash point solution for every application. The ERAFLASH fl ash point testers use the inherently safe CCCFP – Continuously Closed Cup Flash Point methods ASTM D6450, ASTM D7094 and IP 620 and meet the highest safety standards.
With different models and unique measuring options eralytics offers a solution over the widest possible measuring range from -40 °C to 420 °C. With their advanced technology and user-friendly interface, eralytics testers enable easy integration into existing safety protocols, helping to ensure compliance with safety standards and regulatory requirements. Our analyzers are suitable for many applications such as used oils, fresh oils, fuels & biodiesel (FAME), fuel dilution, tar, asphalt & bitumen, fl avors & fragrances, paints & varnishes, pulverized & liquid waste.
Our standard fl ash point tester ERAFLASH is the all-rounder for fl ash point testing in many different industries for all kinds of liquids. Measurements can be done within the temperature range from -25 °C to 420 °C.
The 10-position fl ash point autosampler ERAFLASH S10 is ideal if you have a high sample workload. With a low sample volume of only 1 mL or 2 mL, it is the perfect solution for high-throughput laboratories and takes up very little laboratory space. Measurements can be done within the temperature range from -25 °C to 420 °C.
Our cooling star, the low-temperature fl ash point tester ERAFLASH LT, is the ideal partner if samples with fl ash points below ambient temperature or even below 0 °C are measured. The stacked Peltier design allows measurements within the temperature range from -40 °C to 120 °C. The cooling rates are much faster than with any other instrument on the market.
Our latest analyzer of the ERAFLASH fl ash point tester series is the petroleum fl ash point tester ERAFLASH X: ERAFLASH X – The future-proof replacement
for D93 Pensky-Martens ERAFLASH X is the future-proof replacement for ASTM D93 Pensky-Martens testers. Tailored for the petroleum industry all kinds of liquids can be tested over the wide temperature range of 18 °C to 370 °C using only 2 mL of sample. The full compliance with the latest fl ash point standard ASTM D7094 brings 100% safety, unrivaled speed as well as best-in-class precision to your laboratory.
The unique features of ERAFLASH X at a glance: • No open ignition source • Only 2 mL sample needed • ASTM D7094 & IP 620 compliant • PBT- Peltier Boost Technology® • 2 times faster than a traditional D93 Pensky-Martens test
• Best-in-class precision with ASTM D7094-23
ASTM D7094 vs ASTM D93: A comparison Check out the game-changing advantages of fl ash point measurement according to ASTM D7094:
ASTM D7094 100 % safe: no open ignition source, no risk of fi re in the lab ASTM D93 Risk of fi re in the lab, built-in fi re extinguishers required
Super-fast with 2 times faster turnaround time: A typical diesel measurement at 60 °C takes only 11 minutes A typical diesel measurement takes about 22 minutes Best-in-class precision for the widest sample and temperature range Sample volume of only 1 mL to 2 mL Easy cleaning, practically no waste
The limited accuracy is evident in daily practice Sample volume of 75 mL
Time-consuming cleaning procedure and expensive waste disposal
More information online:
ilmt.co/PL/OkQ6 For More Info, email:
www.eralytics.com email: For More Info, email:
erafl ash S10
THE NEXT ERA Features at a glance:
• Xtra SAFE: 100% safety in the lab In contrast to Pensky-Martens instruments the ERAFLASH fl ash point tester series requires a reduced sample volume of only 1 mL or 2 mL and does not use an open ignition source. An electric arc ignites the sample vapor inside a continuously closed chamber during the measurement and the analyzer determines the fl ash point by the pressure change inside the closed cup. Flash point testing was never safer and easier.
• Xtra FAST: Unmatched heating and cooling rates
All ERAFLASH fl ash point testers use the patented, innovative PBT – Peltier Boost Technology®
. This
technology allows for previously unmatched heating and cooling power. In combination with the low sample volume signifi cantly shorter turnaround times are achieved. With the Peltier Boost Technology® the ERAFLASH fl ash point tester series covers a temperature range of -25 °C to 420 °C within one single analyzer.
• Xtra PRECISE: ASTM D7094 - Best-in-class precision
eralytics fl ash point testers are the most precise fl ash point testers for all kinds of liquids. Confi rmed by an ASTM interlaboratory study there is no statistically signifi cant bias observed between D7094 and D93 Procedure A.
63107pr@reply-direct.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44
