Anton Paar SVM: The Optimal Viscometer for Oil Condition Monitoring


With the increasing emphasis on efficiency and sustainability goals, monitoring the condition of in-service oil has become more crucial than ever. By closely observing alterations in quality, machinery breakdowns and premature oil changes can be avoided, leading to maximum uptime, cost- efficiency and minimal waste.


Viscosity stands out as a critical parameter for quality assessment. Used oil has a different viscosity and a lower viscosity index (VI) compared to fresh oil, indicating greater variation in viscosity with changes in temperature. Both viscosity and VI are much more reliable indicators of oil condition than mileage or time in service. Therefore, it is common practice to measure the kinematic viscosity of used lubricating oil - at 40 °C and 100 °C - and also determine the VI according to ASTM D2270.


Anton Paar offers a comprehensive range of digital viscometers designed for such analyses. From the entry-level SVM 1X01 series for quick viscosity tests to the top-of-the-line SVM X001 models that can determine multiple parameters, including viscosity, density, viscosity index (VI) and more, from a single syringe. The SVM’s wide viscosity range (0.2 mm²/s to 30,000 mm²/s) and temperature range (-60 °C to +135°C, down to -20°C without external cooling) means you can measure a wide variety of used oils without worrying about which glass capillary or bath to choose. The high-end models can even be coupled with an autosampler with up to 71 positions for fully autonomous measurements. And with the top-of-the-line SVM 4001, throughput is further increased by simultaneously measuring the sample at 40 °C and 100 °C while automatically calculating the VI in full compliance with ASTM D2270 and displaying the final result on screen within just a few minutes.


For maximum accuracy and rapid trend detection, each SVM is compatible with a Magnetic Particle Trap (MPT). Designed specifically for in-service oil analysis, this trap removes ferromagnetic particles before samples reach the SVM’s measuring cells, ensuring the most accurate oil quality assessments.


So, if you need to track the performance of a wide variety of in-service oils, Anton Paar’s SVM viscometers offer best-in-class precision and unmatched flexibility in both measurement parameters and automation. Don’t miss out and consider upgrading your lab today.


More information online: ilmt.co/PL/6594 For More Info, email:


email:


Automatized Measurement for ASTM D2983: Higher Precision and Safety with


Peltier Cooling Technology


For More Info, email: email:


Conduct automated, low-temperature viscosity testing down to -40 °C for automatic transmission fluids (ATF), hydraulic fluids, and gear oils, adhering to ASTM D2983 procedure D and D8210. The automation of this process significantly reduces the manual effort required to prepare and execute a D2983 viscosity test, while also enhancing test precision, achieving nearly twice the repeatability and reproducibility compared to procedures A, B, and C. Furthermore, procedure D simplifies the measurement process by eliminating the need for controls with reference fluids for each measurement cycle.


For More Info, email: email:


By integrating all conditioning and testing processes into a self-contained unit that uses a compact, air counter-cooled Peltier technology device for temperature control, temperature fluctuations and result variability caused by sample transfer and disruption are eliminated. This streamlined approach not only saves laboratory space but also renders traditional liquid baths obsolete. Consequently, maintenance costs are substantially reduced. Additionally, the operation is


risk-free since no hazardous cooling liquids, such as methanol, are required. Benefits of Anton Paar’s ViscoQC 300 with PTD 175: ✓ Viscometer and temperature device in one hand ✓ Ready to use right out of the box ✓ No additional space required, saving lab space ✓ Little maintenance, no bath liquid required ✓ Broad temperature range from -45 °C to +175 °C ✓ Convenient operation through ViscoQC’s 7” touchscreen, no PC required ✓ Integrated digital leveling for repeatable results ✓ Unique T-Ready™ function signals when sample has reached set temperature More information online: ilmt.co/PL/XNXV


For More Info, email: email:


For More Info, email: email:


For More Info, email: 63043pr@reply-direct.com


Anton Paar’s World-Class, Comprehensive Density Measurement Portfolio


Anton Paar’s extensive range of density measurement devices covers all three physical states - solids, liquids, and gases - ensuring precise measurements across a wide spectrum of samples and applications.


With over half a century of expertise in density measurement, we provide solutions for diverse sectors in the petroleum industry, from crude oil to bitumen/asphalt, and from LPG to gasoline and lubricants. The portfolio highlights our commitment to innovation, modularity, ensuring flexibility and streamlined automation for our customers.


Entire portfolio for density measurement 1. Handheld density meters


DMA 35 Ex Petrol: Intrinsically safe and compliant with ASTM D7777, ideal for field use in explosive environments.


2. Entry-level and advanced benchtop meters


Features FillingCheck™ and U-View™ for bubble detection, ensuring accuracy and reliability. Compliant with ASTM D4052, D5002, ISO 12185. DMA 1001: Compact entry-level meter.


DMA 4101/4501/5001: Next-level density meters. All are fully automated and come with other measuring parameters like pH and refractive index for comprehensive analyses in one go. 3. High-performance density meters


DMA 4200 M: Designed for high-pressure and high-temperature measurements, perfect for demanding applications like measurement of bitumen/asphalt, LPG or live-crude-oil. 4. Automation


Xsample Series: Multi sample changers like Xsample 631 with options for heating and ambient temperature at the same time, and automatic cleaning, supporting up to 56 vials for full automation and high throughput in the lab.


5. Gas pycnometer


Ultrapyc 3000/5000 determines the density of solids and semi-solids like bitumen/asphalts or greases.


Our solutions are designed for flexibility, offering a wide viscosity and temperature range, ensuring we meet current and future industry standards.


Global service and support


With a global network of subsidiaries and distribution partners, Anton Paar ensures unmatched service and availability, reinforcing our commitment to customer satisfaction and operational excellence all over the world.


www.anton-paar.com


More information online: ilmt.co/PL/85kv For More Info, email:


email: For More Info, email: 63041pr@reply-direct.com 63042pr@reply-direct.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44