MARINE CIVILS, ENGINEERING & CONSTRUCTION
Seaplace Receives LR Approval in Principle for Its Floating Offshore Wind Platform Ballast Control System
Image of tank test of the active ballast control system.
Lloyd’s Register (LR) has granted Seaplace Approval in Principle for its active ballast control system, designed specifically for the company’s floating offshore wind platforms concept, CROWN, a novel technology that includes both buoy and reduced- draft spar operational concepts, expected to reduce CAPEX costs of the floating wind generation.
Seaplace’s active ballast control system is used to ballast/de-ballast the unit, changing the floater from its transport draft to its operational draft and vice versa. The system can also be used to partially or fully compensate the mean tilt produced by the wind loads improving the stability of floating offshore wind platforms.
The system can be used to stabilise the platform if a compartment is damaged, improving the safety level of the floating
platform. Additionally, the system’s level of redundancy ensures it will still function even if one component, such as a valve or pump, fails for any reason.
The system was reviewed against applicable Rules and Regulations for the Classification of Offshore Units, including the acceptance of preliminary Failure Modes Effects and Criticality Analysis (FMECA) of the system. In addition, its software allows for remote manual operation, semi-automatic control and automatic operation.
Seaplace’s system, which has been designed to be used with different types of floating wind platforms, was first tested with software‑in‑the‑loop tests and then with scale model tests performed at the IH Cantabria Offshore basin, as part of the CROWN project.
Approval in Principle forms part of the final phase of the CROWN technology development which enables Seaplace
to move forward with the full-size demonstration concept.
Mark Darley, LR Marine & Offshore Director, commented: “Lloyd’s Register is proud to have supported Seaplace in the final phase of the CROWN technology development, enabling the company to move onto the full-size demonstration concept stage. This novel technology could help operators and their floating wind assets reach their market potential, with estimates of up to 10GW of capacity projected to be installed globally by 2030 and more than 100 GW by 2050.”
The floater platform technology has been designed to optimise manufacturing, enabling the production of one unit per week. Seaplace anticipates the floater concept will be able to host not only large wind turbines, but also hydrogen/ammonia systems and solar panels, all at once without impacting the unit stability.
July 2021
www.dockyard-mag.com 35
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
