search.noResults

search.searching

dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
CASTING, MOULD MAKING


CASTING, MOULD MAKING


LIQUID MOULD MAKING


LiquaFast Ice (Rapid Cure), Castaldo USA


• Thin & easy to pour • 1Kg tubs • Requires no vulcaniser! • For full instructions see the PDF link above • For use with liquid mould frames, see from code C52347


• Made in USA • Castaldo LiquaGlass*


*LiquaGlass is a registered trademark of Castaldo USA Code


Description C52343 LiquaGlass Kit, 1Kg


UOM Price 1KG


£49.95


RUBBER MOULD MAKING


LiquaFast Ice


• Cures rapidly at normal room temperatures and even faster at slightly warmer temperatures


• Cures in 60 to 90 minutes at room temperature with 0% shrinkage


• Cures in 30 minutes at 50 °F with 0% shrinkage • Transparent liquid silicone rubber • Lets you make moulds of delicate objects that would not survive the heat and pressure of the normal vulcanization process


LiquaCast, Castaldo USA


• Makes strong, tough & tear-resistant permanent molds that last and last and do not become soft with age


• Rapid moulds from rapid prototypes • Thin & easy to pour • 1Kg tubs • Requires no vulcaniser! • For full instructions see the PDF link above • For use with liquid mould frames, see from code C52347


• Made in USA • Castaldo LiquaFast Ice*


*LiquaFast Ice is a registered trademark of Castaldo USA


Code C52346 Description LiquaFast Ice Kit, 1Kg LiquaCast


• Safely moulds just about anything without shrinkage! • Liquid silicone rubber • Lets you make moulds of delicate objects that would not survive the heat and pressure of the normal vulcanization process


• Cures in 18 hours at room temperature • Cures in 90 minutes at 66 °C • Easy to pour, easy to mix and easy to vacuum de- bubble because of its low viscosity


• Makes strong, tough & longer lasting moulds that can be used again and again


• Requires no vulcaniser! • 1lb or 10Lbs tubs • For full instructions see the PDF link above • For use with liquid mould frames, see from code C52347


• Made in USA • Castaldo LiquaCast*


*LiquaCast is a registered trademark of Castaldo USA Code


Description


C52344 C52345


LiquaCast Kit, 1lb LiquaCast Kit, 10lbs


UOM Price 1LB


10LBS


£24.95 £82.95


LiquaGlass (Transparent Moulds), Castaldo USA


UOM Price 1KG


£43.95


Castaldo Jewellery Moulding Rubber has been the industry standard for more than 40 years and continues to be the best jewellery moulding rubber available for lost wax jewellery casting.


Castaldo Gold Label® contains even more pure natural gum rubber, making it even softer and more pliable. Experienced mould-makers know that this compound’s superior qualities can save them substantially on labour costs when used for difficult moulds containing undercuts, where a stiffer mould would break delicate wax patterns or would make their production impossible altogether.


Castaldo® No Shrink Pink®, eliminates casting shrinkage without the need for expensive, messy and time consuming liquid moulding compounds.No Shrink Pink is strong, tough and long lasting, ready to give you years of service. Say goodbye to messy measuring cups, mixing bowls and gooey spills. Forget about vacuuming moulds to eliminate entrapped air.


LiquaGlass


• Crystal clear, see through moulds • Injecting Castaldo LiquaGlass moulds is easy because you can SEE the wax as it is injected


• Makes strong, tough & flexible production moulds at a fraction of the price of clear silicone rubbers


• LiquaGlass is easy to measure, de-bubble. • LiquaGlass cures at room temperature in 24 hours with 0% shrinkage


• Easy to use/mix 1:1 mix ratio • Lets you make moulds of delicate objects that would not survive the heat and pressure of the normal vulcanization process


www.COUSINS .COM


Castaldo Titanium Label jewellery moulding rubber packs, cuts, bends, flexes and stretches just like our standard White Label® and Gold Label® rubber. And because it is so hard it can be clamped at much higher pressures without mould distortion and injected at higher wax pressures and at lower wax temperatures. The combination of those factors means better detail and reduced wax pattern shrinkage


Castaldo White Label®, the less expensive and firmer of the three grades, has a high concentration of pure natural gum rubber,


1241


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114