TECH SPOTLIGHT RED ENGINEERING PUTS NEW RUBBER PADS TO THE TEST


FAST track testing services provided by RED Engineering have helped to confirm the viability of new rubber coated tensioner pads under development for the offshore energy sector.


The North East-based firm of engineers completed the work for Metflex Precision Mouldings Ltd, which needed to validate the performance characteristics of its new EM range of natural rubbers.


The project has involved a small-scale test rig to complete a set of comparative friction coefficient tests of a 50mm x 50mm x 5mm sample against a polyurethane (PU) section already in use for tensioner track pads.


Initial results have been encouraging and used to validate the improved friction and wear characteristics of the rubber pads, revealing an average increase in friction coefficient value of 19% at high crush loads and 49% at low crush loads.


In the offshore sector, tensioners form a central part of most pipelay systems and are used on-board pipelay vessels to retain tension as the pipeline is being installed on the seabed. Any potential increase in friction properties allows operators to hold higher pipe and cable top tensions for the same crush force on a tensioner.


Metflex believes that its new products, which are part of a drive to expand


p48 | www.sosmagazine.biz | July 2017


its capabilities, will deliver a better performance than existing systems, and needed REd Engineering’s tensioner pad testing expertise to help to confirm this.


These new products, developed for back deck tensioner, SURF and submarine cable handling systems, complement Metflex’s existing subsea clamp inner liners, which have been independently verified to meet API 17L part 1 specification.


The next phase will see full scale testing but on the back of initial results Metflex has been able to provide a provisional top tension value to its first customers.


Ben Sculthorp, sales manager and responsible for business development at Metflex, said the project demonstrated REd Engineering’s experience in providing rapid testing solutions.


He added: “using REd’s expertise and test facility, we have been able to validate very quickly the potential for our products,


and confirm the improved performance benefits that it offers to our customers.”


Established in 2008, RED


Engineering (formerly RED Marine) has rebranded in a move that


reflects growing demand for its expertise beyond the offshore oil and gas marine sector. Services include consultancy, supply of bespoke equipment and qualification testing.


More at:


www.redengineers.co.uk In these pictures:


Small scale friction test equipment.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52