This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Valve Grinder Short self-locking stem Special valve grinding bit, small grinding spring, and OREGON® 42-333 vacuum cup furnished
T
42-423 Wireless Tachometer Built-in selector switch to choose 0-5000 RPM low scale, or 0-15,000 RPM high scale RPM readout accurate to within + or - 2% Solid state electronics. Zener voltage regulator uses 9-volt battery (not included) Built-in battery check For all 2-cycle & 4-cycle single cylinder engines
42-450-0 Roll Pin Punch Set Contains:
5/32" 3/16" 7/32" 1/4"
5/16" 42-516
PT. SIZE 1/8"
PIN LENGTH 2"
2-1/2" 2-1/2" 3"
3-1/2" 4"
OVERALL LENGTH 4"
4-1/2" 4-1/2" 5"
5-1/2" 6"
Valve Refacer Clamp designed so that main strain is directed into the machine V-block May be held in vise or screwed to bench Black enamel finish
88-400 Oil Extractor Hand operated vacuum pump mounts on 6 liter container to extract fluids from inaccessible or confined areas Ideal for oil changes on boats, cars, motorcycles and lawn power equipment. Approximately 10 strokes are needed to empty most lawn mower engine sumps. Comes with a removable pouring spout for easy disposal. Also works great for trapped water.
88-405 Oil and Fuel Extractor Fuel and oil removal and transfer system. Remove oil and other fluids into the 48oz. plastic container using the provided pump and hoses . Also use for fuel transfer between equipment using the universal adapter provided. Insert the adapter and pump into the fuel opening of the machine needing fuel and the transfer hose into the tank with fuel; pump the handle to start transfer. Quick and simple operation.
42-960 Oil Drain Pan 6 quart capacity Resistant to chemicals and solvents Convenient pouring spouts for disposal . Low profile easily slides under lawn and garden tractors.