This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Recommended Use: Replacement chain for chain saws originally equipped with 1/4" pitch chain on a bar with a nose radius of 12 mm or less designed for carving applications.
Features • Micro Chisel® cutters have small-radius working corners that cut fast and are easy to sharpen.
• Small size and light-weight make 25A easy to use and highly maneuverable.
WARNING: Failure to use this chain on bars with nose radii of 12 mm or smaller can result in severe kickback.
Sculptor Bars: See Guide Bar section, pg. 118 Saw Sizes: Up to 38 cc
GAUGE 25A .050" KICKBACK SAFETY CUTTER TYPE CUTTER SEQUENCE
3
25F
Recommended Use: Replacement chain for chain saws originally equipped with 1/4" pitch chain on a bar with a nose radius of 12 mm or less designed for carving applications.
25F
Features • Micro Chisel® cutters have small-radius working corners that cut fast and are easy to sharpen.
• The ”Full-House“ sequencing makes 25F the preferred chain of some carvers cutting fine details and finishing work.
WARNING: Failure to use this chain on bars with nose radii of 12 mm or smaller can result in severe kickback.
Sculptor Bars: See Guide Bar section, pg. 118 Saw Sizes: Up to 38 cc
GAUGE .050" KICKBACK SAFETY CUTTER TYPE CUTTER SEQUENCE