This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
20-series chain is a low-kickback chain that meets the ANSI low-kickback standard without compromising performance or cutting speeds. It is the high performance choice for occasional users, arborists and commercial cutters.
Features • Micro Chisel® cutters have small-radius working corners for excellent performance and ease of maintenance.
• Blued Cutters provide superior corrosion resistance and improved strength.
• “X” grind – Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes.
• Patented Chain Steel – OREGON® OCS-01 steel is patented and provides greater durability, especially in cold cutting conditions.
Bar Lengths: Saw Sizes:
13 to 20 in. (32 – 50 cm) 38 to 62 cc
LubriLink™ tie straps help keep oil where it’s needed – on the chain.
LubriWell® oil holes help carry oil around the full length of the guide bar’s groove.
20LPX 21LPX 22LPX
The high-performance chain for professional woodcutters who use .325"-pitch saws.
Features • Blued Cutters provide superior corrosion resistance and improved strength.
• “X” grind – Enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias (undercut) modes.
• Top-performing square-corner “chisel” cutters. • Bumper drive links help reduce kickback. • The .325" version of our popular Super 70 chain.
Bar Lengths: Saw Sizes:
13 to 20 in. (32 – 50 cm) 38 to 62 cc
LubriLink™ tie straps help keep oil where it’s needed – on the chain.
LubriWell® oil holes help carry oil around the full length of the guide bar’s groove.
Vibe-Ban® chassis design reduces vibration 25% or more at the handles.
Witness Mark™ Top-plate witness mark makes accurate sharpening easier.
GAUGE
20LPX 21LPX 22LPX
.050" .058" .063"
KICKBACK SAFETY CUTTER TYPE CUTTER SEQUENCE
Vibe-Ban® chassis design reduces vibration 25% or more at the handles.
Witness Mark™ Top-plate witness mark makes accurate sharpening easier.