This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
• Made of Swedish steel to exceed international standards for durability and safety. • Ground edge can be easily re-sharpened with standard saw chain files. • Grass and brush blades include a 20 mm reducer bushing for easy mounting on .75" arbors. • 3 and 4 tooth blades are reversible.
All OREGON® grass-and-brush blades and clearing-saw blades are rated to 13,000 RPM and they are so stamped. However, OREGON® recommends that these blades SHOULD NOT be installed on any brushcutter capable of spinning the blade faster than 10,000 RPM.
41-920 41-921
41-923 41-925
BLADE DIA. HOLE DIA. BUSHING 10"
12"
8" 9"
1" 1"
1" 1"
THICKNESS
20 mm 2.25 mm 20 mm 2.25 mm
USE FOR CUTTING AND CLEARING HEAVY WEEDS AND UNDERBRUSH 41-922
USE FOR CUTTING GRASS AND WEEDS 41-924
8" 9"
1" 1"
Use for cutting grass and weeds 3-TOOTH GRASS & BRUSH BLADES
• Patented design • Creates airlift to remove debries out of the way of the cutter • Self-Sharpening cutting edge • Reduces engine drag
41-938 - NEW 10" 41-939 - NEW 12"
BLADE DIA. HOLE DIA. BUSHING THICKNESS 1"
1" CLEARING SAW BLADES
• Made of Swedish steel to exceed international standards for durability and safety. • Ground edge can be easily re-sharpened with standard saw chain files.
All OREGON® grass-and-brush blades and clearing-saw blades are rated to 13,000 RPM and they are so stamped. However, OREGON® recommends that these blades SHOULD NOT be installed on any brush cutter capable of spinning the blade faster than 10,000 RPM
41-926 41-927 41-928 41-929
41-931 41-932 41-933
SERIES XRT
XRT XRT XRT
EIA EIA EIA EIA
BLADE DIA. HOLE DIA. THICKNESS TEETH 8"
8" 9" 9"
8" 8" 9" 9"
41-936 MAXI 41-937 MAXI
OEP 814
8" 9" 9"
.75" 1.0" .75" 1.0"
.75" 1.0" .75" 1.0"
1.0" .75" 1.0"
1.5 mm 1.5 mm 1.8 mm 1.8 mm
RECOMMENDED FOR STRAIGHT SHAFT TRIMMERS OF 24CC AND LARGER 41-930
1.5 mm 1.5 mm 1.8 mm 1.8 mm
RECOMMENDED FOR STRAIGHT SHAFT TRIMMERS OF 30CC AND LARGER 41-935 MAXI
1.5 mm 1.8 mm 1.8 mm
Recommended for straight shaft trimmers of 40cc and larger Trimmers - Brush Cutter Blades