Advertorial
SHOWCASE
Food and Beverage Quality Compressed Air
he food and beverage industry uses compressed air in a wide diversity of processes. Some compressed air is used as general purpose air to operate pneumatic devices, controllers and sometimes as simple as blow-down air. This air does not come under the most stringent quality requirements. Other processes have the compressed air directly in contact with the product and of course this would be required to meet a standard typically 100% oil free and with a dew point at pressure of -40°C. So how does the food/beverage industry ensure that it is meeting the high quality standards set either internally, by the customer or a regulatory body such as the British Compressed Air Society/British Retail Consortium Code of Practice? We at BEKO TECHNOLOGIES provide measuring equipment which can measure flow, pressure, pressure dew point, leakage and one that is not so easy or common, remaining oil vapour content down to 0.003ppm or better than Class 1 for the ISO standard (ISO 8573-1). To answer the question posed, most companies do not measure the oil vapour content for two reasons. First is that many companies have invested in oil free compressors and believe that they have nothing to fear and second that they are not aware that the equipment to make this measurement in situ is available at a reasonable cost. Without going into the whole oil free air or oil free compressor debate, suffice it to say that a 100% oil free compressor will not add to hydrocarbon content in the air but equally will not remove any present in the ambient inlet air. BEKO TECHNOLOGIES is aware of a site with a 100% oil free compressor recording Class 2 ISO for oil content at periods corresponding to shift changes and hence much vehicular activity. To be absolutely sure about the quality of compressed air in the food/beverage or indeed many others, it is important to measure the dew point and the remaining oil vapour content. BEKO TECHNOLOGIES have two solutions for customers. The METPOINT OCV for oil vapour and the METPOINT DPM are available for sale to permanently install and monitor continuously the customer’s air quality. There is a second option using a Mobile Measuring Station where the customer can contract to have the equipment brought to site by a BEKO TECHNOLOGIES technician, the meters installed and left for a specified period before removal and reporting on quality and any remedial work.
T
The Mobile service is offered by BEKO TECHNOLOGIES direct on the UK . BEKO are offering a special introductory price on the service for customers. BEKO TECHNOLOGIES
Tel: 01527 575778 Web:
www.beko-technologies.co.uk
enter 801
Enter 15 20 SEPTEMBER 2012 Process and Control
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36