This book includes a plain text version that is designed for high accessibility. To use this version please follow this link.
PRODUCTS PennEngineering®


smaller thread sizes ideally suited for high-volume consumer and medical devices, among other applications. Among features and benefits, Phillips Screw highlights that the system’s unique geometric spiral design maximises recess wall


T T


and driver contact to provide extremely high torque transfer without cam-out. The drive’s low-profile head and high-strength shallow recess additionally contribute to reducing overall fastener weight. Various fastener head styles can be accommodated.


New capability for aerospace attachment applications


3V® Fasteners Company Inc., based in Corona, CA, USA, has introduced


a new capability to supply titanium bolts and screws to satisfy standard designs or accommodate unique customer requirements for a wide range of attachment applications in the aerospace industry.


he externally threaded NAS and MS parts are manufactured from traditional titanium alloy TI-6AL-4V and weigh 40% less than comparable non-titanium hardware. They ideally suit applications onboard commercial and military aircraft from actuators to seat track assemblies, among many others. In addition to inherent weight savings, 3V Fasteners points out that its titanium fasteners exhibit high strength-to-weight


ratio, high-temperature properties and stability, low density, and corrosion resistance. Also, parts can be manufactured to achieve 160KSI tensile strength, 95KSI shear strength, and demonstrate excellent fatigue performance. 3V titanium fasteners can be provided in various head types (12 point, hex, flush, flat fillister, and pan) and drives in thread sizes -04 to -8 and diameters .093 to .500. All can be offered either uncoated or with aluminium or cadmium plate.


Forged M10 Tubtara® D


ejond explains that this development offers a new, cost saving solution to the industry because there is almost no waste during the forging process, as Dejond makes optimal use of the expensive 316 material.


Whereas the stainless 304 is used more in home and commercial


applications, the stainless 316 has proven its effectiveness in all circumstances, indoor as well as outdoor, where corrosion or higher temperatures are critical and a long-term, non-magnetic solution is required. Containing more than 2% molybdenum, the 316 material is effective


in environments exposed to chlorides, salt water and elevated temperatures. Having only just been launched, the stainless M10 programme is still in progress. Larger production volumes in round and hexagonal version, with open or closed end and different head forms offer good prospects for the future. Samples are available on request.


150 Fastener + Fixing Magazine • Issue 68 March 2011 in stainless 316 More than 20 years ago Dejond started forging TUBTARA® blind rivet nuts in stainless steel 304,


followed more recently by an additional range in stainless steel 316. It has now introduced a new technical challenge: the forged M10 Tubtara®


in stainless steel 316. awarded


Phillips Screw license PennEngineering®


has been awarded a license from Phillips Screw Company for its patented MORTORQ® SUPER Spiral Drive System.


he proprietary drive system was developed to deliver extremely high-torque capability for fasteners without risking damage to screw heads or surrounding areas. The drive will be integrated by PennEngineering into various PEM®


key strategy to enter the threaded small-diameter screw market. New product offerings will include screws in 2mm and fastener products and further advances the company’s


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156  |  Page 157  |  Page 158  |  Page 159  |  Page 160  |  Page 161  |  Page 162  |  Page 163  |  Page 164