This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Lubricant use reduced by 50% – Over-application of lubricant on metal sheet prior to forming created safety problems for a parts manufacturer in addition to being wasteful. Solution: An AutoJet® low pressure nozzles has eliminated overspray and ensures lubricant is applied only when needed.
Downtime decreased by 87% – Clogged nozzles were causing hourly shutdowns for a processor applying a viscous lubricant to parts. Solution: An AutoJet spray controller triggers nozzles to spray only when needed and automatic spray nozzles equipped with clean-out needles prevent clogging.
Scrap decreased by 75% – Inconsistent application of release agent into mold cavities was causing quality problems for an automotive parts manufacturer. Solution: An AutoJet spray controller adjusts the spray pressure of the nozzles to ensure the proper volume of release agent is applied as molds pass through the spray station.
Lubrication System with
Let us help you achieve results like these. Learn more: spray.com/results or 1.800.95.SPRAY