“When we partner with someone, we are
very open as far as numbers we are going to need.”—Sean O’Brien, Purchasing Manager, BAF
parts but it is a simpler process.” As BAF has developed new prod-
ucts, the use of diecasting also has grown, particularly with the launch of a line of fans for which BAF designed and assembled the motor two years ago. Coinciding with the design of the motor was a push to redevelop several components as die castings at the same time. “It was the first time we assem- bled our own motor,” Oleson said. “We designed the detail, structural requirement, precise location of the holes, and how the blades would rotate about the center of the motor. Casting allowed us to design all the shapes we wanted to shed weight and allow a path for the internal electron-
ics to get to the motor.” Tis motor—for the Essence line— is not the company’s first foray into diecasting, but it was the first time it made a concerted effort to utilize the process upfront when it could be most advantageous. Because the company moves so fast in product development, a few past components that might have been perfect for diecasting ended up as extrusions or fabrications because of the long tooling time associated with diecasting. Some of these have been converted to diecasting, but the Essence was the opportunity to get the parts as die castings from the start. One of BAF’s directives to product
development is to make fans that are as efficient, unobtrusive and quiet as
they can. To achieve this, the various components of the fans must work seamlessly together in balance. Design details like concentricity of holes, dimensional tolerances and feature locations all are critical. “Diecasting has better process con-
trol [than other metalforming methods] and gives us the number of parts we need,” Oleson said. During the design phase of the
electronics enclosure for the Essence motor, BAF worked closely with its die casting supplier, Production Castings, Fenton, Mo., to optimize designs and meet production deadlines. “[Production Castings] has a
relationship with other casting suppliers who do diecasting with a different spin—low volume rapid prototyping and investment casting,” Oleson said. “So we prototyped with investment casting and when we were happy there, we tooled up as a short run die casting—all before making
BAF assembles its fans in Lexington, Ky., and sources a large majority of its components in North America. Facilities in other parts of the world also use this locally-sourced approach.
January 2016 MODERN CASTING | 27
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68