This page contains a Flash digital edition of a book.
designed for lighting loads controlled by DALI, DSI or 1‐10V dimmable ballasts. These products switch lights on when an


BSEE WHAT’S NEW D


ANLERS’ new range of passive infra‐red (PIR) occupancy switches with daylight linked dimming (maintained lux level) is


area is occupied and maintain a chosen lux level by dimming the lights in response to changes in the ambient daylight level. There is also a “Run‐on” timer (corridor function) which allows the light to return to a minimum background level following a period of occupancy. This can either be for a chosen time or as a permanent background light.


To feature in What’s New, call Claire Rixon on 01622 699198 PIR occupancy switches with daylight linked dimming Each control has a switching relay, capable


of switching 2 amps (500W) LED lamps and fittings or up to 6 amps (1500W) of most other types of load. This extensive new range includes flush


and surface mounted PIR switches – as well as both surface high bay mounted or batten mounted high bay versions. Additionally, there are versions in either Presence or Absence detection as well as variants in the ControlZAPP and EasyZAPP range. Call 01249 443377, email: sales@danlers.co.uk or visit:


www.danlers.co.uk


introduced its ActivFlo range of domestic and commercial water conditioners to the market.


B


Weatherproof accessories from a name you can trust!


to provide unparalleled levels of safety and practicality in both commercial and domestic applications. Easy to install, the PowerBreaker ProteKt range has been designed to offer the highest levels of protection against the ingress of water and solid matter (IP66) to provide safe and efficient electrical connections in even the most arduous conditions. Ideal for use in industrial environments, such as


E


wash down areas, as well as in a whole host of commercial areas and around the home, the range includes single, twin and PowerBreaker RCD sockets, single and twin switches, timers and fused spurs. PowerBreaker ProteKt enclosures feature a


spring‐loaded hinge to ensure the lid closes and the guided fixing holes are isolated in a weatherproof chamber – eliminating the requirement for sealing screw entries – saving time for the installer. Replaceable knockouts allow easy reconfiguration


of installation. Available from our nationwide network of


PowerBreaker Stockists www.greenbrook.co.uk


lectrical safety specialist, GreenBrook, has developed a new range of weatherproof accessories, the PowerBreaker ProteKt range,


With 60% of the UK being affected by hard


water, there is a significant market for reliable and effective water conditioners. ActivFlo and ActivFlo Pro provide an efficient solution to hard water issues and limescale build‐up without requiring the addition of a chemical limescale inhibitor, the removal of any waste product, or regular maintenance. ActivFlo extends the service life and


improves efficiency of heating equipment, as well as preventing costly equipment failure. Created with installers in mind, ActivFlo’s


clean ‘in‐line’ design allows for quick and easy installation in new build and retrofit


V


ent‐Axia has won ‘Energy Efficient Product or Innovation of the Year’ at the prestigious Chartered Institution


of Building Services Engineers (CIBSE) Building Performance Awards 2017. Scooping the award for its revolutionary


Sentinel Kinetic Advance Mechanical Ventilation with Heat Recovery (MVHR), the Sussex‐based company received the accolade at the Grosvenor House, London, last month. The first UK‐manufactured, web‐enabled,


App‐controlled MVHR unit, Advance provides energy efficient ventilation and features groundbreaking commissioning and control via its App, which encourages best practice and saves installers time on site. Perfect for care homes, student


accommodation and new build residential properties, Advance tops the PCDB list as the best performing MVHR system in its class. Boasting a specific fan power of 0.38W/l/w with 93% heat recovery and


Kingspan helps with ambitious expansion at Tate Modern


has been installed as part of the iconic new extension to Tate Modern in London. Switch House adjoins Tate


O


Modern’s existing home within the former Bankside Power Station to provide over 5,000sq m of new exhibition space on 10 levels. The new extension opened to the public last June. In addition to the top‐class film, video, photography and performance areas it also provides learning facilities for all ages. Kingspan Kooltherm FM Duct Insulation was installed in a 40mm thickness. The insulation provides premium performance and comprises a fibre‐free rigid thermoset phenolic insulation core, which is Class 0 as defined by Building Regulations. It is externally faced with an aluminium vapour barrier foil and internally faced with glass tissue. Its rigid nature ensures the specified thickness is maintained at the


corners, and can help to create a continuous and fully sealed vapour barrier for an aesthetically pleasing finish. Kingspan Kooltherm FM Duct Insulation has a thermal conductivity of 0.022 W/m.K or better, has a BRE Green Guide A+ rating, is manufactured under a BS EN ISO 14001: 2004 scheme, and is produced at Kingspan Insulation’s Pembridge and Selby manufacturing facilities which are certified to BES 6001 ‘Excellent’.


www.kingspanindustrialinsulation.com


ver 1,300sq m of Kingspan Kooltherm FM Duct Insulation


airflow of 100l/s at 150Pa, Advance offers high pressure development. This new breed of MVHR is not only efficient, it is also extremely quiet with trickle settings up to 40% staying below 20dBA, achieving the Holy Grail of high efficiency and low sound levels. The Judges were impressed by the


Sentinel Kinetic Advance’s ingenious use of very modern technology, its ability to “deliver strong performance” as well as “ease of installation” and that internally it is made from recycled materials.


www.vent‐axia.com


Luceco supplies retail lighting solutions for Maplin


to realise its lighting refurbishment project, playing a key role with the design and supply of LED energy saving luminaires to the group. Converting much of its


T


store estate, the project included the need for better lighting within its stores and lower energy costs. With the roll‐out now


complete, the finance team at Maplin reported an increase in the original energy consumption savings above predicted levels. Luceco is now proud to have


recently supplied luminaries for another significant project – Store of the Future. The Luceco lighting design team was tasked with designing an LED lighting solution using the proven recessed and highly efficient Luceco LED Panels. The design also called for


lighting solutions to suit various areas in the store including


42 BUILDING SERVICES & ENVIRONMENTAL ENGINEER MARCH 2017


Consultation and Gaming rooms, Home Entertainment, Play, Smart Life and Home Office. The key products used were 1200x600mm high output backlit panels for the high lighting levels required and platinum downlights with brushed steel bezels in the Consultation and Gaming rooms. Back of house lighting was


achieved using IP65 climate luminaires in the storage areas, Atlas bulkheads in WCs, and LuxPanels in offices, providing a complete retail lighting solutions package!


www.luceco.com


hroughout 2016 Luceco worked with Maplin Electronics


Southwark, is a great example. This building is part of the £3bn regeneration of the Elephant and


T


Castle area and it will deliver 450 private rental, shared ownership and interim rent homes. Supporting this development and ensuring that water will be


delivered where and when it is needed, is a range of Grundfos Hydro MPC‐E energy efficient booster pump sets. These solutions were delivered to site on skids that were ready for


installation. Built at the 10,000sq m Grundfos manufacturing plant in Sunderland, this level of offsite engineering adds value and offers customers design, build, assemble, test and distribution from under one roof, as well as many H&S and economies of scale benefits. Delivering the amount of housing that the market now requires, especially in the South East, is going to be an on‐going challenge. However, projects like this one are enjoying the benefits of off‐site build supported by companies like Grundfos. With some innovative thinking, it is possible to improve on the


delivery of housing solutions. www.grundfos.co.uk


VISIT OUR WEBSITE: www.bsee.co.uk


Grundfos innovation supports London housing project


he lack of reasonably priced and suitable accommodation in London is well known. The Greater London Authority (GLA) has been trying to assist and a recently completed high‐rise project in


Inta launches ActivFlo water conditioners


ritish heating and plumbing product manufacturer Inta has


applications. Its patented fitting system allows it to be removed from an in‐line installation without modification of the existing pipework. Conforming to Part L building regulations, the WRAS‐


approved ActivFlo catalytic water conditioner is available with 15mm to 2” connections with a class‐leading 15 year warranty. For commercial installations, the ActivFlo


Pro is available with connections from 22mm to 10” and boasts a lifetime warranty. ActivFlo Pro also features optional building management system (BMS) connectivity for remote monitoring and integration with smart building solutions. For more information call call 01889 272 180 or visit:


www.intatec.co.uk British manufacturer Vent‐Axia wins at CIBSE Awards


Güntner Coil Defender addition to corrosion protection portfolio


foodstuffs are processed and stored, require corrosion‐ resistant units. It is precisely these


C


applications for which Güntner introduces the Coil Defender, a high‐quality yet affordable addition to our corrosion protection portfolio in the Compact product line. Particularly in the sensitive


food sector, e.g. for the storage of citrus fruits, in fermentation interrupters and in processing rooms, the Güntner Coil Defender is a high quality solution for all cases that require a unit with increased corrosion protection and where stainless steel would be over the top. The powder coating, evenly applied to the entire coil, reliably protects the conventional material combination of copper/aluminium from corrosion. The powder coating is also food‐safe, thus


old rooms with an aggressive atmosphere where, for example,


perfectly adds to the HACCP‐ certified Güntner air coolers. The Coil Defender is a standard


option for all air coolers of the Compact product line. Those air coolers equipped with Coil Defender are designed in a way that facilitates easy cleaning. In addition, the Coil Defender powder coating is resistant to conventional cleaning agents. For more information on the


innovative Coil Defender, please visit our Güntner website:


www.guntner.co.uk


Big Foot Systems shortlisted in 2017 H&V News Awards


B


ig Foot Systems, which supplies non‐penetrative rooftop support solutions for


safe access equipment and building services, has been shortlisted in the H&V News Awards Retrofit Project of the Year category for its project with Coca‐Cola European Partners Great Britain (CCEP GB). Big Foot supplied a custom Safe Access solution and HD Beams rooftop plant support for CCEP GB’s Wakefield factory. CCEP GB wanted to increase


production hall cooling ventilation, adding two air handling units to the existing lightweight standing seam roof. The project needed to ensure minimal disruption during the installation and reduce the risk of a leaking roof above a facility capable of producing 6,000 cans of soft drink and up to 2,200 bottles every minute. Having previously worked with Big Foot Systems, the CCEP GB


consultant on the project suggested using Big Foot for a plant and service support strategy, eliminating the need to penetrate the roof. The lightweight roof


construction was a challenge but Big Foot’s technical team proposed several options, leading to a fully‐ developed solution using their HD Beam product to span the main rafters and the purlins, while taking the load back to the main rafters. The solution also provided safe


access for maintenance of the newly installed AHUs.


enquiry@bigfootsupport.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48