BSEE CASE STUDY
Advertising: 01622 699116 Editorial: 01354 461430
The landmark Queensferry Crossing in Scotland will be one of the most efficient bridges ever built. Designed to incorporate a complex array of utilities and communications equipment, a partnership between cable management specialist voestalpine Metsec plc, M&E fixings supplier MEF and M&E contractor SES Engineering Services Ltd (SES), has been critical in delivering the systems to support the 2.7km road bridge and ensure its safe and efficient running for decades to come.
Collaborative approach delivers
the UK’s most connected bridge D
ue to open in May, the Queensferry Crossing is the centrepiece of a major upgrade to the cross-Forth transport corridor in the east of Scotland. It will be the longest three-tower, cable-stayed bridge in the world and represents a Scottish
Government capital investment of more than £1.3bn.
The 250-tonne steel bridge sections arrived in Rosyth docks from China, where they were then prefabricated to incorporate all of the services and road surfaces. The cable management systems supplied by Metsec are prefabricated into 424 modules by SES and then installed into each of the 110 finished 750- tonne road section decks before they are taken out by barge onto the River Forth and then lifted by crane to connect to the span between the bridge towers.
Consortium
All of the cable management products had to be pre-approved by the construction contractors, the Forth Crossing Bridge Constructors Consortium (FCBC) which consists of HOCHTIEF Solutions AG, American Bridge International, Dragados S.A and Morrison Construction. Due to the extreme temperatures, thermal extension couplers for cable management were designed into
the project with the support of the Metsec team to help compensate for the movement of the bridge due to temperature fluctuations, wind and traffic.
Gordon Cullen, Contracts Manager at SES explains: “While we have extensive experience in major infrastructure developments, the Queensferry Crossing is a once-in-a- lifetime project that demands a highly collaborative approach to ensure we can meet and match the exact requirements to deliver all of the component parts of the bridge on time and on budget.
“MEF is a part of the SES approved supply chain and it selected Metsec not only because it was the best from a commercial and quality point of view, but because it was able to supply the cable management systems we needed in bespoke sizes.”
Metsec supplied hot dip galvanised cable tray and cable ladders cut to special size lengths, the trays to 3.5m and the ladders to 6.9m. The finished modules assembled by SES will hold a complex array of water management and cabling needs, from lighting and power, traffic management systems, security, fire alarms, radio communications, structural health monitoring and building monitoring, all designed to give optimal control over the management and performance of the bridge.
Cullen continues: “It’s a highly complex installation that effectively acts as the ‘brains’ of the bridge, controlling everything from the timing of the lights to maintenance planning with a focus on optimising efficiency and communications not just on the bridge itself but on how it communicates with the traffic management systems that feed into it.”
Reliability and quality
Alistair Fairweather at MEF adds: “This is a fantastic project to work on and much of our involvement has been down to the support we have had from Metsec. We have worked with them for six or seven years and we knew that their involvement would be vital to us winning this contract. The sizes needed were not standard, but their UK-based manufacturing capabilities gave us the option to offer a flexible, high quality solution to SES that we knew Metsec could fulfil to deliver on time and on budget. In fact, flexibility was critical not just in securing the project but in meeting evolving requirements as the project has progressed over the past 12 to 18 months.
“We have put a lot of faith in partnering with Metsec for what has been one of the biggest projects we have ever worked on and it has really paid off. The reliability and the quality of service from the Metsec
team has been as important as the quality of the product. The 55 micron hot dipped galvanised steel tray and ladder systems used will need to endure exposure to the elements for up to two years before being completely sealed in under the bridge, and the high quality of the product will contribute to keeping the whole life costs of the project down.”
Jon Hillier, Director at Metsec cable management division added: “The Queensferry Crossing project was something we were keen to be involved in from the start. We knew we had the capability to
re-programme our mill to allow us to manufacture the specified lengths of ladder and tray in a way that would fit perfectly into the required modules.
“Working with MEF meant that we were also able to offer the just-in- time capabilities needed to support the tight prefabrication scheduling for each deck for the bridge. We are really excited about seeing the bridge completed and operational, knowing that our products are effectively supporting the complex systems that will drive the functionality of a bridge that is not only destined to be an infrastructure showpiece, but will help drive transport connectivity in the region for years to come.”
http://www.metsec.com/
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48