ISAFE ONE ITEC CONTRACT FLOORS
Whether it is healthcare, education or the retail sector, Itec’s ability to supply a good looking floor that will stand the test of time ensures it remains top of the list for clients, specifiers and contractors alike.
isafe One from Itec’s safety flooring stable was recently rolled out across Plumbing Trade Supplies centres up and down the country in a nationwide re-fit programme. It is the perfect solution for busy environments such as PTS thanks to its hardwearing durability and non- slip credentials.
isafe One is a high-performance safety floor covering providing an R11 rating for slip resistance to protect areas at risk from water spillage. The Hyperguard+ PUR low maintenance technology ensures an easy wipe option for when slips and spills occur, something also demanded to ensure customers can shop in a hazard free environment.
The centres have experienced isafe One in its Gainsboro Grey design, this Class 43 choice suitable for heavy industrial use yet blending with its surroundings in effortless fashion, proving that aesthetics have been considered just as carefully.
Sean Dawson of Hull Flooring, explained, These floors are ideal for sites such as PTS where safety flooring is a must to avoid staff and customers slipping.” The floors also required the minimum of hassle to install, again increasing their popularity; “isafe One was very simple to install, in many cases utilising the cold weld system. With this in mind, it’s safe to say we will be using Itec safety flooring again on future projects”.
KERATECH ECO 30 KERAKOLL
Keratech Eco R30 is an extra rapid-hardening self-levelling compound for internal use in thicknesses between 3 and 30mm, so is excellent for floors with a large variation in levels. It can be used in all both domestic and industrial installations and on heat radiant slabs.
Compatible with all cement-based, reactive-epoxy and water based polyurethane 2-component adhesives, it is suitable as a base for all sorts of tiles and stone, as well as hardwood and resilient materials including rubber, linoleum and PVC.
It is highly suitable for use on mineral screeds or screeds made using Rekord Eco or Keracem Eco as binder or ready-for-use premixed products, cement-based screeds, concrete and those with well anchored residual traces of cement-based additives and with under- floor heating.
An extra-rapid hardening, eco-friendly, self-levelling mineral product for the high-performance, high-thickness correction of irregular substrates Keratech Eco R30 is ideal for use in Green Building. Not only this but with low CO2
emissions and very low volatile organic compound emissions, it is recyclable as an inert material at the end of its life.
Keratech Eco R30 develops a high degree of workability guaranteeing an ideal surface for the subsequent laying of ceramic tiles and natural stone using eco-friendly mineral adhesive.
www.itecfloors.co.uk 16 | VOTE NOW
www.kerakoll.com
www.tomorrowscontractfloors.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32